| Home |
| Search |
| Today's Posts |
|
#15
|
|||
|
|||
|
On Thu, 12 Jul 2007 05:23:51 +0100, " Peter"
wrote: +++With pure amplification, the signal may have altered in amplitude, +++but a sinusoidal waveform will still be a sinusoidal waveform on +++the output. The sine, angular frequency and phase shift are +++all unchanged. ************* Wrong Depending on how the amplifier is configured there is a phase shift. In a Common emmiter configured transistor amp there is a 180 degree shift in the pahse. So the waveform is altered by phase. Only the emitter(source) follower in a semiconductor amplifier will not cause a phase shift. Correct that the angular frequency is not changed and that a sine wave is a sine wave, but still the amplitude has changed. Therefore they are not identical weaveforms. Therefore they do change, if only in amplitude. james |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| So you lids don't want to learn CW, what are you going to learn instead? | Equipment | |||
| Wilderness Sierra output power slowly increases? | Homebrew | |||
| BBC World Service increases its presence in Argentina | Broadcasting | |||
| BBC World Service increases its presence in Argentina | Shortwave | |||
| The technical level of QST increases | Policy | |||