Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
1. Remove bottom cover from radio.
2. On the main PCB, locate J33. 3. Locate wires on pins marked "P5" (yellow) & "P6" (grey). 4. Cut wire on "P5" (yellow) and install a SPST switch in line. 5. Cut wire on "P6" (grey) and install a SPST switch in line. NOTE: By using two of the function switches available on the radio will eliminate the need for two new switches to be installed and mounted. -- On the internet, no one can hear you scream. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Channel Master choices | Antenna | |||
export cb radios | Policy | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
New CBer, asking about Galaxy CB radios | CB | |||
above channel 30 ssb only..? | CB |