LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old December 17th 03, 09:59 PM
Donald Sherwood
 
Posts: n/a
Default

To bad your not in my neck of the woods I could convert that radio to a
standard 4 or 5 Pin connector.

As for Mic Gain, it is used to increase the signal (Your Voice) to the
radio. Just like a Car audio amp Gain, it is not a volume control. If it is
truely a Gain circuit, cranking the gain will usally induce alot background
noise or may feedback.

"Josh" wrote in message
om...
I bought a used Cobra 41 Plus CB, without the manual. The first
pushbutton on it is labeled NB. What exactly is this? I can't tell
that it does anything when it's pushed.

Also, the mic for the 41 Plus is a smaller DIN-type connector with 5
or so small pins. Do they make adaptors which will allow me to
connect a regular 4-pin mic connector to the 41 Plus?

Finally, what is the Dynamike control supposed to do?



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
28.635KHz mystery signal. No Spam Boatanchors 5 January 21st 05 08:26 PM
Looking for Icom 751 silver button [email protected] Equipment 0 September 24th 04 01:38 PM
Looking for Icom 751 silver button [email protected] Equipment 0 September 24th 04 01:38 PM
Cobra 18 WX ST II vs. Cobra 75 WX ST All-in-handset -numbskull CB 0 December 13th 03 05:01 AM
Help!! Please help with this old Cobra Rig!! Mark CB 0 September 26th 03 09:30 PM


All times are GMT +1. The time now is 06:49 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017