Home |
Search |
Today's Posts |
#3
|
|||
|
|||
Droll... very droll...
Trouble is that there is still a risk that just as pull into the station you transmit a signal and somebody filling up on the other side of your pump gets toasted. Seriously how are most mobile packet setups wired? Are they wired into the ignition which would turn the radio off when you turn off the engine? The problem with this is that if someone steals your car and parks it somewhere you won't be able to determine its location. I'd be keen to hear how people wire and use their mobile setups. Thanks Peter "Roger" wrote in message ... peter berrett wrote on 07/02/2004 10:17: I have been looking at the use of APRS over packet radio and noted that many Amateurs now have mobile installations in their cars both for fun and to assist in tracking the vehicle should it get stolen. This is quite an appealing idea however I do have one concern that I hope an experienced mobile APRS user could assist me with. When one visits petrol/gas stations here in Australia one sees signs saying to switch off one's mobile phone as the electromagnetic radiation could cause a spark and ignite fuel vapour. It has made me wonder how to make APRS safe so that should you be filling up your car at a gas station you can be assured that a regular APRS update from your mobile APRS setup won't run a risk of causing a fire. Have APRS users considered this possibility and what precaustions, if any, are taken to deal with this problem? This works well for me - Lean slightly forward, apply gentle pressure with index finger to button on radio labelled PWR. -- Roger Barker, G4IDE - For UI-View go to - http://www.UI-View.com For WinPack go to - http://www.peaksys.co.uk |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
The exciting world of APRS | Antenna | |||
Antenna Safety Question | Antenna | |||
APRS Linked Repeaters | Digital | |||
Question about GPS and APRS | Digital | |||
Question about GPS and APRS | Digital |