Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I know the proposed BPL system uses frequencies from 2-80 MHz
and I belive it uses spread spectrum. Does it have to use every possible freq in that range or could it skip the ham bands if we kick up enough fuss? It seems pretty clear to me that it will happen - 150,000 hams are outnumbered by more than 100:1 by those who want broadband delivered to the doorstep. Not only do I think it will happen, but I also expect the RFI levels to be "adjusted" so as to allow more pollution - hey, it works for greenhouse gas and power plants and...... Derek aa5bt |
#2
![]() |
|||
|
|||
![]() "Derek Wills" wrote in message ... I know the proposed BPL system uses frequencies from 2-80 MHz and I belive it uses spread spectrum. Does it have to use every possible freq in that range or could it skip the ham bands if we kick up enough fuss? I'm guessing it will make enough of a mess that harmonics will also be a problem. It seems pretty clear to me that it will happen - 150,000 hams are outnumbered by more than 100:1 by those who want broadband delivered to the doorstep. You make the assumption that BPL will actually deliver broadband! It is one of the stupidest proposals I've seen. Not only do I think it will happen, but I also expect the RFI levels to be "adjusted" so as to allow more pollution - hey, it works for greenhouse gas and power plants and...... Exactly. "Gee, we need more signal to get the bandwidth we need." "Those hams are causing interference to our network, get them off air." Derek aa5bt -- ... Hank Hank: http://horedson.home.att.net W0RLI: http://w0rli.home.att.net |
#3
![]() |
|||
|
|||
![]() "Derek Wills" wrote in message ... I know the proposed BPL system uses frequencies from 2-80 MHz and I belive it uses spread spectrum. Does it have to use every possible freq in that range or could it skip the ham bands if we kick up enough fuss? I'm guessing it will make enough of a mess that harmonics will also be a problem. It seems pretty clear to me that it will happen - 150,000 hams are outnumbered by more than 100:1 by those who want broadband delivered to the doorstep. You make the assumption that BPL will actually deliver broadband! It is one of the stupidest proposals I've seen. Not only do I think it will happen, but I also expect the RFI levels to be "adjusted" so as to allow more pollution - hey, it works for greenhouse gas and power plants and...... Exactly. "Gee, we need more signal to get the bandwidth we need." "Those hams are causing interference to our network, get them off air." Derek aa5bt -- ... Hank Hank: http://horedson.home.att.net W0RLI: http://w0rli.home.att.net |
#4
![]() |
|||
|
|||
![]() "Derek Wills" wrote in message ... I know the proposed BPL system uses frequencies from 2-80 MHz and I belive it uses spread spectrum. Does it have to use every possible freq in that range or could it skip the ham bands if we kick up enough fuss? It seems pretty clear to me that it will happen - 150,000 hams are outnumbered by more than 100:1 by those who want broadband delivered to the doorstep. Not only do I think it will happen, but I also expect the RFI levels to be "adjusted" so as to allow more pollution - hey, it works for greenhouse gas and power plants and...... Derek aa5bt Keep in mind that the non-ham frequencies are also used by somebody (government, commercial interests, etc.). So skipping around the ham frequencies doesn't really solve the problem. Some one is going to be interfered with. Dee D. Flint, N8UZE |
#5
![]() |
|||
|
|||
![]() "Derek Wills" wrote in message ... I know the proposed BPL system uses frequencies from 2-80 MHz and I belive it uses spread spectrum. Does it have to use every possible freq in that range or could it skip the ham bands if we kick up enough fuss? It seems pretty clear to me that it will happen - 150,000 hams are outnumbered by more than 100:1 by those who want broadband delivered to the doorstep. Not only do I think it will happen, but I also expect the RFI levels to be "adjusted" so as to allow more pollution - hey, it works for greenhouse gas and power plants and...... Derek aa5bt Keep in mind that the non-ham frequencies are also used by somebody (government, commercial interests, etc.). So skipping around the ham frequencies doesn't really solve the problem. Some one is going to be interfered with. Dee D. Flint, N8UZE |
#6
![]() |
|||
|
|||
![]()
Keep in mind that the non-ham frequencies are also used by somebody
(government, commercial interests, etc.). So skipping around the ham frequencies doesn't really solve the problem. Some one is going to be interfered with. Yes, of course, but they are not always right up against the power lines as the typical ham is. Derek aa5bt |
#7
![]() |
|||
|
|||
![]()
Keep in mind that the non-ham frequencies are also used by somebody
(government, commercial interests, etc.). So skipping around the ham frequencies doesn't really solve the problem. Some one is going to be interfered with. Yes, of course, but they are not always right up against the power lines as the typical ham is. Derek aa5bt |
#8
![]() |
|||
|
|||
![]() "Derek Wills" wrote in message ... Keep in mind that the non-ham frequencies are also used by somebody (government, commercial interests, etc.). So skipping around the ham frequencies doesn't really solve the problem. Some one is going to be interfered with. Yes, of course, but they are not always right up against the power lines as the typical ham is. I bet most, if not all of them, have power lines going directly into their facilities. In many cases they may have more than one feed. -- ... Hank Hank: http://horedson.home.att.net W0RLI: http://w0rli.home.att.net |
#9
![]() |
|||
|
|||
![]() "Derek Wills" wrote in message ... Keep in mind that the non-ham frequencies are also used by somebody (government, commercial interests, etc.). So skipping around the ham frequencies doesn't really solve the problem. Some one is going to be interfered with. Yes, of course, but they are not always right up against the power lines as the typical ham is. I bet most, if not all of them, have power lines going directly into their facilities. In many cases they may have more than one feed. -- ... Hank Hank: http://horedson.home.att.net W0RLI: http://w0rli.home.att.net |
#10
![]() |
|||
|
|||
![]()
Hank Oredson wrote:
It seems pretty clear to me that it will happen - 150,000 hams are outnumbered by more than 100:1 by those who want broadband delivered to the doorstep. You make the assumption that BPL will actually deliver broadband! It is one of the stupidest proposals I've seen. That, and most of the people who are willing to pay the price for broadband already have it. It's my understanding that BPL has already failed financially in Germany and early plans for deployment in the U.K. seem to have slowed down substantially. I'm of the sense that both cable and DSL are far more common in the U.S. than in Europe - that if BPL couldn't make a go of it in Europe where comparatively few consumers already have a competing technology, then it's even less likely to work (financially) in the U.S. where the competition does have a solid head start. My fear... is that the power companies really aren't all that interested in providing broadband internet. They're tired of being cited for leaky insulators and want to get the Part 15 limits raised so they don't have to bother fixing them. ================================================== ======================= I note with interest they're talking about using frequencies as high as 80MHz. All three major TV network affiliates here are on low-band VHF channels 2, 4, and 5. An S6 signal in the 54-82MHz band will cause harmful interference to all three stations. And the digital TV conversion won't solve the problem - the CBS station's digital assignment is 56 which means they're going to be back on channel 5 - 76-82MHz - at the end of transition. Judging from how ATSC digital TV deals with impulse noise, I suspect an S6 BPL signal in TV channel 5 will make digital reception on that channel impossible. Channels 2, 4, and 5 are used for major stations in Boston, NYC, Chicago, Detroit, San Francisco, Seattle, Los Angeles, Dallas, and many other smaller cities. National Association of Broadcasters vs. the electric power industry. Could be an interesting battle. (I wonder what an S6 BPL signal at 49MHz would do to a baby monitor?) -- Doug Smith W9WI Pleasant View (Nashville), TN EM66 http://www.w9wi.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
I have a dumb question about antenna building | Antenna | |||
Dumb Question Dept. - Antenna Angle | Antenna | |||
Hopefully not a dumb question per CATV | Antenna | |||
Dumb question? | Antenna | |||
Yagi / Beam antenna theory question... | Antenna |