The "frequency mode" scan functions under control of memory channels 1 & 2,
when both of these two memory channel frequencies are within the same
band ------ and the selected/activated vfo (VFO A OR VFO B) is also tuned to
this same band, repetitively scanning downward betweem the high frequency
amd the low frequency memory settings in memory channels 1 & 2..

My 751 continues to scan after the squelch is activated and stops when the
squelch is next closed.

Hope this may help.

Charles/W6JNF



"KB8M" wrote in message
oups.com...
I run an IC-751 with a Windom at 30'. The radio works fine after
replacing the old leaking caps. However, when trying to scan it will
not stop when the squelch opens. It just keeps scanning. Any
thoughts?

Thanks,
Doug/KB8M