Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
"DaveLG" wrote in message
... On Feb 6, 3:36 pm, Frank wrote: I am new to ham radio. I was given an Icom 735. Set up radio per owners manual. Using a wire antenna (set up for 10meters), an MFJ tuner. I am not getting any signals at all. Double checked all connections and set per manual again. I could use a few suggestions. Check out the WWV time signals. The 10MHz signal is pretty powerful Do you have, or can you borrow, a signal generator that covers the band(s) you're trying to receive? If so, connect the generator to the antenna connector on the radio, tune both to an in-band frequency, and see if the receiver works. Could be that the radio had problems... that's why it was given away. -- Dave M MasonDG44 at comcast dot net (Just substitute the appropriate characters in the address) "In theory, there isn't any difference between theory and practice. In practice, there is." - Yogi Berra |
Thread Tools | Search this Thread |
Display Modes | |
|
|