On Mon, 22 Oct 2007 12:54:16 -0400, Jimmie D wrote:

I want to build something like this but without the PIC interface. Instead
I want to control it directly from a printer port. I am looking for
examples of software that can talk to DDS chips in this manner. As a
matter of fact I plan on building the device so that the whole thing will
fasten to the printer port or possible mounted internal to the PC. Any
help would be greatly appreciated.


Jimmie



The general problem is going to be that WINXP, 2000, Vista, and NT make
it difficult to use the printer port pins directly. Not impossible, but
certainly a problem.

You could use something like a PIC877 or some such to act as a serial
input which would then allow using Rs232 to communicate from the PC to a
radio.

Alternatively, use WIN98 and the printer pins are "up for grabs" with
fairly simple PC programs.


N6BIU



--

19:30 Pacific Time Zone
Oct 23 2007

International Time
02:30 UTC
24.10.2007