"Tim Shoppa" wrote in message
ups.com...
Actually, ten colors available! 0-9 is ten, not nine. Sometimes I fall
into FORTRAN mode too so I won't blame you for being off by one :-).

I don't know if the Pomona parts are 100% identical, but I just
ordered a few sets from Digikey sold under the "Emerson/Johnson" name.
I'm guessing they're all made in China by the same company:

http://dkc3.digikey.com/PDF/T073/P0372.pdf

With wonderful toys like this available, made in China, the lead content
should be checked!
Please, please do not put them in your mouth.

Mike W5CHR
Memphis

On Oct 15, 11:59 am, wrote:
"Tim Shoppa" wrote in message

ups.com... Actually, ten colors available! 0-9 is ten, not nine. Sometimes I fall
into FORTRAN mode too so I won't blame you for being off by one :-).

I don't know if the Pomona parts are 100% identical, but I just
ordered a few sets from Digikey sold under the "Emerson/Johnson" name.
I'm guessing they're all made in China by the same company:

http://dkc3.digikey.com/PDF/T073/P0372.pdf

With wonderful toys like this available, made in China, the lead content
should be checked!
Please, please do not put them in your mouth.

Hey, I grew up holding 60/40 solder in my mouth while plugging
krypton-85 filled regulator tubes in my left hand and turning knobs
just inches away from radium-filled meters with my right hand. None of
it made in china. And I'm perfectly normal!

Joking aside, it's pretty obvious that a test set with 1000V B+
running around obviously won't be in my kids' hands much less in their
mouths.

Tim.

In article ,
wrote:
"Tim Shoppa" wrote in message
oups.com...
Actually, ten colors available! 0-9 is ten, not nine. Sometimes I fall
into FORTRAN mode too so I won't blame you for being off by one :-).

I don't know if the Pomona parts are 100% identical, but I just
ordered a few sets from Digikey sold under the "Emerson/Johnson" name.
I'm guessing they're all made in China by the same company:

http://dkc3.digikey.com/PDF/T073/P0372.pdf

With wonderful toys like this available, made in China, the lead content
should be checked!
Please, please do not put them in your mouth.

I suspect the lead content on them is much lower than it should be. The
Chinese are not exactly big into making quality phosphor bronze and most
of these sorts of parts coming from China tend to be made from cheap and
gummy cartridge brass. That's okay for the socket, not so good for the plug.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."