Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]()
Forgive the top posting - note the interpolations.
On Aug 26, 10:43*pm, Syl wrote: Thanks. Several of those specs do bring questions though as they aren't properly defined (unless they are in the full FCC documentation ? Well, not really - what the FCC requires is apart from many of the specifications shown. Example: US Federal requirements on automobiles write to certain requirements - leather seats is not one of them. Part 15 writes to certain requirements - Accepting stereo inputs, broadcasting 20hz - 20khz, and very low distortion are not amongst them. They are the leather seats. a) Just what "very low distortion" means ? To me, very low distortion would be 0,001% as a minimum. But I understand that in the real world of transmitters, 0,1% is probably considered very low distortion figures ? This based on the presumption that attaining 0,001% distortion figures is easier to attain than using tube technology. Correct me if I am wrong. In the specifications - which you have to dig further into the site to find. However from my discussions with Phil, that VLD is relative to most commercial broadcasters and also a function of the much broader bandwidth. b) Adjustable compressor/limiter. To what levels ? Also in the specifications. c) High Quality PC Board and Components. Does this means the homebrewer can't use Chinese made parts [grin] I am not so sure how to answer that question. I have seen homebrewers use the functional equivalent of Venusian water buffalo poop in their rigs - as long as it meets the radiation requirements of Part 15, I am not so sure the Feds will care. Phil sources his parts from all over the place - but many of the custom parts are made locally - not in China. Of course I do not mean to start a discussion on these points, merely thinking out loud...;o) You mean that you are not taking a page from Mr. Byrns' book and attempting to poison the waters around what should be a pretty simple discussion? ;-{ 0 But...I now better understand the requirements for part 15. As It shows, the only difference between a commercial unit and a homebrewer's is the latter does not have to pay labs testing and approval for his "concoction" whereas the former (the manufacturer) has to have the FCC seal of approval and the of course the onerous fee(s) along with the approval tag. Something like that. I wonder how the FCC manages the homebrewer's "concoctions", other than reacting to complaint(s) ? I suspect this is what happened to the kit builder whom got fined sometime ago ? Basically, the FCC (as it is presently constituted) is a dumping ground for political hacks owed a small favor and the sons of wealthy political hacks owed a larger favor. There is not a scintilla of competence throughout its political-appointee management and hasn't been for perhaps the last 6 - 20 years (maybe much longer), depending on whose ox was gored most recently. For the most part, its regulations are written so vaguely that the adage "Money talks, the rest walks" covers their behavior. The individual who was assembling SSTRANs for resale got fined by the FCC because a competitor selling a fully-assembled product WITH the FCC compliance certificate at over 10X the cost felt threatened and injured - and had the money and was paying the fees to get action. It is interesting to note that said kit-builder is back and has done the thing he should have done in the first place to be in full compliance with Part 15 (not sell assembled transmitters) yet still perform the service for his customers - so simple and so obvious that he missed it for years and was fined. He is now bullet-proof in that sense. Care to guess how he is doing it? Put it this way, every single solitary AM transmitter *KIT* sold in the United States today for single-house use from Vectronics to Ramsey to SSTRAN to the L'il 7 et.al. that calls itself "Part 15 compliant" is subject to the same regulations. It is my opinion based on my experience with most of them that the SSTRAN happens to be the most convenient unit to use and short of a parts-box home-brew represents the best value-for-money in addition to its convenience. That Phil is a distant neighbor and a decent guy does not change any of that. As the "other" Phil notes, the FCC reacts to complaints. If the complainer is of the party-in-power and also has money may affect the speed and effectiveness of their response - though not necessarily. Peter Wieck Melrose Park, PA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Panaxis ACC100 Part 15 FM Transmitter Frequency Selection and Minimum Separation | Shortwave | |||
vlf transmitter. part II | General | |||
vlf transmitter, part II | Homebrew | |||
WTB Zenith part/part radio | Swap | |||
WTB Transoceanic Part/Part radio | Boatanchors |