I guess I always get confused by these posts. What good does it do to
jam the offenders receiver? He can't hear it until he unkeys. If he
keeps getting that annoying tone in his receiver, the easiest way to get
rid of it is to go key down again.

Scott
N0EDV

Guy wrote:
when I lived in Reno, NV there was a person who was not very friendly
on the radio. He was always getting drunk and once he was full of
liquid courage, would swear, throw dead carriers, drive the drivers
and us locals crazy. So a cb/ham operator made a device that was real
small,,,it was placed in close proximity to his house, within 1/4
mile. When he would key up on ch-19, it would start a audio carrier
that was intermittant,,it was like a pulse for 5-7 minutes, he would
key up again and once again get this pulsating tone, is the best way
to describe it. Needless to say he cleaned up his act, and started to
come around. So now I am in willamette valley and have the same
problem. the person who made that "toy" has passed on,so now I am
looking to get something of the same concept made. Any ideas? JPT.

Hi,

The way I read the post is that the pulsing noise would
come out of the rig of the offending individual each time
he keyed-up which puts this 'device' in the urban-legend
category.


Cheers - Joe

Hi,

OOPS! On a second reading I think that I misunderstood
the posting and realise now that the device was meant to
generate an annoying signal for a few minutes 'after' he
had released the pressel. Were it close enough to the
offending station, it would only need to be of quite low
power and limited sensitivity so restricting it to the
offending individual.

As we all know, one of the intentions of those who seek
to disrupt a channel is to subsequently wallow in the
result of their efforts. This signal then would help
prevent them from enjoying the fruit of their labours.
Unfortunately though there doesn't appear to be a newsgroup
equivalent.


Cheers - Joe

"Joe McElvenney" wrote in message
...
Hi,

OOPS! On a second reading I think that I misunderstood
the posting and realise now that the device was meant to
generate an annoying signal for a few minutes 'after' he
had released the pressel. Were it close enough to the
offending station, it would only need to be of quite low
power and limited sensitivity so restricting it to the
offending individual.

That's what I got. To do this @ 455KHz would require lots of antenna
or power. 1/2 mile is very long. I used to interfere with other kids
transistor radios by tuning mine 455 away so that the LO in mine was on
their Rx freq. weeeeoooeeee. Only works a few feet.

--
Steve N, K,9;d, c. i My email has no u's.


As we all know, one of the intentions of those who seek
to disrupt a channel is to subsequently wallow in the
result of their efforts. This signal then would help
prevent them from enjoying the fruit of their labours.
Unfortunately though there doesn't appear to be a newsgroup
equivalent.


Cheers - Joe

Steve Nosko wrote:
"Joe McElvenney" wrote in message
...

Hi,

OOPS! On a second reading I think that I misunderstood
the posting and realise now that the device was meant to
generate an annoying signal for a few minutes 'after' he
had released the pressel. Were it close enough to the
offending station, it would only need to be of quite low
power and limited sensitivity so restricting it to the
offending individual.


That's what I got. To do this @ 455KHz would require lots of antenna
or power. 1/2 mile is very long. I used to interfere with other kids
transistor radios by tuning mine 455 away so that the LO in mine was on
their Rx freq. weeeeoooeeee. Only works a few feet.

A friend of mine was thinking of building a small transmitter that would
put out on 262khz, 455khz (am) and 10.7mhz fm. It was to be a low power
portable transmitter to be used mobile when he got cut off my some
***hole on the road. He could then curse the guy out over his radio
(assuming he had the radio on).

Maybe this was touched on before, but since we're discussing the designing
of jamming devices for idiot radio operators, how about something to jam the
audio of the ass holes who insist on playing their stereos full blast in the
cars? Now "that" would be a treat! I'd love to replace that deep thumping
crap with a nice high pitched squeal. CL

On Thu, 4 Mar 2004 21:44:27 -0500, "CL" wrote:

Maybe this was touched on before, but since we're discussing the designing
of jamming devices for idiot radio operators, how about something to jam the
audio of the ass holes who insist on playing their stereos full blast in the
cars? Now "that" would be a treat! I'd love to replace that deep thumping
crap with a nice high pitched squeal. CL

me too, but the source seems to invariably a CD stacker.

On Thu, 4 Mar 2004 21:44:27 -0500, "CL" wrote:

Maybe this was touched on before, but since we're discussing the designing
of jamming devices for idiot radio operators, how about something to jam the
audio of the ass holes who insist on playing their stereos full blast in the
cars? Now "that" would be a treat! I'd love to replace that deep thumping
crap with a nice high pitched squeal. CL

me too, but the source seems to invariably a CD stacker.

Jamming the (hip-hop/rap crap)assholes with their high powered car radios
blasting that hip-hop crap is EASY! try this...(I do it a lot) take two
transmitters( I use 2 50 watt 2 meter TX's) and key them both at the same
time. Set the frequency to something not used a lot (I use 146.565).The
resulting hetrodyne will come out of ANYTHING non-linear! It tears their
system a new asshole.If one of the radios is VFO (like my IC-706MKII-G) you
can swing it around and set it for the most annoying tone.
It usually hits their power amplifier directly, they dont have control of it
from the head.In fact when we tested it on a guys system( he was a willing
sucker) it got worse as he turned down the volume!! Seems it forms a ground
loop and the RF gets into the power amp even better. By the time they figure
it out, damage is done. a pair of 2 meter "spikes" is hard to see and they
dont know what they are for...have fun! Eddie


"CL" wrote in message
...
Maybe this was touched on before, but since we're discussing the designing
of jamming devices for idiot radio operators, how about something to jam
the
audio of the ass holes who insist on playing their stereos full blast in
the
cars? Now "that" would be a treat! I'd love to replace that deep thumping
crap with a nice high pitched squeal. CL

Jamming the (hip-hop/rap crap)assholes with their high powered car radios
blasting that hip-hop crap is EASY! try this...(I do it a lot) take two
transmitters( I use 2 50 watt 2 meter TX's) and key them both at the same
time. Set the frequency to something not used a lot (I use 146.565).The
resulting hetrodyne will come out of ANYTHING non-linear! It tears their
system a new asshole.If one of the radios is VFO (like my IC-706MKII-G) you
can swing it around and set it for the most annoying tone.
It usually hits their power amplifier directly, they dont have control of it
from the head.In fact when we tested it on a guys system( he was a willing
sucker) it got worse as he turned down the volume!! Seems it forms a ground
loop and the RF gets into the power amp even better. By the time they figure
it out, damage is done. a pair of 2 meter "spikes" is hard to see and they
dont know what they are for...have fun! Eddie


"CL" wrote in message
...
Maybe this was touched on before, but since we're discussing the designing
of jamming devices for idiot radio operators, how about something to jam
the
audio of the ass holes who insist on playing their stereos full blast in
the
cars? Now "that" would be a treat! I'd love to replace that deep thumping
crap with a nice high pitched squeal. CL