LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 6th 18, 08:14 PM posted to,
Phi Phi is offline
external usenet poster
First recorded activity by RadioBanter: Feb 2014
Posts: 17
Default T100 soldering irn

+ACI-Guy G4DWV 4X1LT+ACI- wrote in message
+AD4- It's amazing. I have had my TS 100 for a week now. Needs to be fed
+AD4- with 24v (and no more) for best results.
+AD4- If buying on eBay, AVOID the seller +ACI-keepsmywords2+ACI- or similar who
+AD4- ships from Ireland. After dealing with that seller, used another
+AD4- shipping from Germany for only a little bit more.
+AD4APg-Microprocessor controlled, keeps pumping heat into
+AD4APg-the tip if faced with a large area, eg, FGC tabs.
+AD4- It actually does not behave any differently to other irons in this
+AD4- respect. However, if you install third party firmware, you can press a
+AD4- button and get a temporary (configurable) increase in temp. Finger off
+AD4- the button and the iron cools to the regular temp.
+AD4- The great thing about it is that it is very light and does not take up
+AD4- a lot of room. With the third part firmware, one can program in a
+AD4- standby temp and a time when the iron will switch off. Not wasting
+AD4- power should make the greenies happy.
+AD4- Happy to answer questions if anybody wants any further info.
+AD4- --
+AD4- 73 de Guy G4DWV 4X1LT

Not suitable for's digital

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
T100 soldering irn Gareth's Downstairs Computer Homebrew 7 June 8th 18 12:07 AM
Soldering a PL-259 Steve CB 6 January 24th 09 02:20 PM
Problem with soldering gun David Thompson Homebrew 23 November 7th 05 11:36 PM
Soldering Suprise KØHB Homebrew 1 August 18th 04 12:18 AM
Soldering Suprise KHB General 1 August 18th 04 12:18 AM

All times are GMT +1. The time now is 10:24 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 RadioBanter.
The comments are property of their posters.

About Us

"It's about Radio"


Copyright © 2017