Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Hello Jeff, wrote:
Hi, Im confused regarding the choice of iron powder toroid for a 7Mhz high pass filter. I need to use a small size (T68) toroid. For the freq range, some reference texts say T68-2 is the one, others say T68-6" grade. I see differing "best Q range" specs for the 6 grade.....2-30Mhz......10-50Mhz...etc. Have similar need for 20Mhz LPF, but assume "6" is really the choice there. Any suggestions as to the relative differences and reasons to choose between grades 2 and 6 for the HPF in T68 size? Not that this is an exact science but typically I switch from #2 to #6 around 10MHz. But I never design with high Q because that can be a pain in production. Regards, Joerg http://www.analogconsultants.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT- The Five Iron | CB | |||
PRO-95 good choice? | Scanner | |||
Iron powder vs. ferrite cores for low-power inductors | Homebrew | |||
Iron powder vs. ferrite cores for low-power inductors | Homebrew |