Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() "Michael Coslo" wrote I plan on routing the line along the roofline, then run it to and below the soffit. Then into the usual entrance. What is a good holder for the ladder line - basic windowed plastic variety? I used a standard screw-in TV-line standoff. In some places in the route, I just hung it with string. But my biggest concern is that metal soffit. I'll be running along about 20 feet of that, and I suspect that there will be some effect. What is a safe distance from the soffit? I'd guess 4 - 5 inches should be fine. I ran both 300 and 450 ohm plastic "ladder" line at my old townhouse, and had no trouble using the above methods. I even ran the line through a frame/stucco/chickenwire house wall, via a 2" diameter PVC pipe, with good success. Howard N7SO |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
ladder line?? | Antenna | |||
Using Twin Lead or Ladder Line for your Antenna's Feed-in-Line ? - Then 'consider' a Pair of Vintage Style TV Antenna Clips . . . | Shortwave | |||
Using 450ohm ladder line | Antenna | |||
Feed Line Length - Ladder Line | Antenna |