Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 17th 07, 01:22 AM posted to alt.binaries.pictures.radio
external usenet poster
 
First recorded activity by RadioBanter: Jun 2007
Posts: 2
Default Fisher Type RP-44 info needed

Recently I acquired what appears to be a radio direction finding
receiver manufactured by Fisher Research Lab in Palo Alto CA. It is
Type RP-44, serial no. 267. Tube lineup is: 6SK7 RF, 6K8 converter,
6SK7 IF, 6SK7 BFO, 6SQ7 1st AF-Det, 6K6 output. It has three bands, but
frequencies are unknown as there is only one tuning scale, marked from
0-100. With it I received what looks like a loop antenna which fits on
top at the center of a compass rose. It appears to be powered through a
multi-pin connector on the back.

When a friend found out that I was interested in old radios, he offered
this to me along with some other gear that had been stored in his shed
for years. The rest I disposed of as worthless, but even though I had
to clean a rats nest out of it, I thought this unit might be worth
saving and possibly restoring.

I could find no info on the web, but I did find the company, which is
still in business, mainly in the manufacture of metal detectors. An
e-mail to the company brought the response that they had no information
on this unit, not even in their archives.

I could always trace the wiring (which looks to be in good shape under
the chassis), but a schematic would be a big help, and any other
information would be great.

Ralph Seefeld

Attached Thumbnails
Fisher Type RP-44 info needed-p1010029.jpg  
  #2   Report Post  
Old June 18th 07, 02:52 AM posted to alt.binaries.pictures.radio
external usenet poster
 
First recorded activity by RadioBanter: Apr 2007
Posts: 91
Default Fisher Type RP-44 info needed

Love the speaker grill!

It looks like this has more problems than salt spray. What is the inside
like?

Have fun with it.

--
Jim Mueller

To get my real email address, replace wrongname with eportiz. Then replace
nospam with sacbeemail.

"Ralph Seefeld" wrote in message
...
Recently I acquired what appears to be a radio direction finding
receiver manufactured by Fisher Research Lab in Palo Alto CA. It is
Type RP-44, serial no. 267. Tube lineup is: 6SK7 RF, 6K8 converter,
6SK7 IF, 6SK7 BFO, 6SQ7 1st AF-Det, 6K6 output. It has three bands, but
frequencies are unknown as there is only one tuning scale, marked from
0-100. With it I received what looks like a loop antenna which fits on
top at the center of a compass rose. It appears to be powered through a
multi-pin connector on the back.

When a friend found out that I was interested in old radios, he offered
this to me along with some other gear that had been stored in his shed
for years. The rest I disposed of as worthless, but even though I had
to clean a rats nest out of it, I thought this unit might be worth
saving and possibly restoring.

I could find no info on the web, but I did find the company, which is
still in business, mainly in the manufacture of metal detectors. An
e-mail to the company brought the response that they had no information
on this unit, not even in their archives.

I could always trace the wiring (which looks to be in good shape under
the chassis), but a schematic would be a big help, and any other
information would be great.

Ralph Seefeld



  #3   Report Post  
Old June 18th 07, 05:32 PM posted to alt.binaries.pictures.radio
external usenet poster
 
First recorded activity by RadioBanter: Jun 2007
Posts: 2
Default Fisher Type RP-44 info needed

Judging from the nice under-chassis condition, I would say salt spray
wasn't a problem. Rodents were the culprits. They were able to enter
the casing, but couldn't get below. Here's more pix. I'm sure the tube
sockets will need close attention, and who knows what I'll find inside
the IF and RF cans? That is, if I decide to attempt a restoration.

Jim Mueller wrote:
Love the speaker grill!

It looks like this has more problems than salt spray. What is the inside
like?

Have fun with it.



  #4   Report Post  
Old June 18th 07, 07:09 PM posted to alt.binaries.pictures.radio
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 100
Default Fisher Type RP-44 info needed

Ralph Seefeld wrote:
Judging from the nice under-chassis condition, I would say salt spray
wasn't a problem. Rodents were the culprits. They were able to enter
the casing, but couldn't get below. Here's more pix. I'm sure the tube
sockets will need close attention, and who knows what I'll find inside
the IF and RF cans? That is, if I decide to attempt a restoration.


I'd say it was a mild case of salt...air at least. The underchassis
condition is a function of it's greater protection. The parts exposed
to the air look extensively (although not severely) corroded. If it
were just plain humidity and age, the underside would probably be similar.

jak


Jim Mueller wrote:
Love the speaker grill!

It looks like this has more problems than salt spray. What is the
inside like?

Have fun with it.



------------------------------------------------------------------------


------------------------------------------------------------------------


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Request Info on Type 825 Tube CyberFrank Equipment 1 July 6th 07 11:10 PM
Needed: Info or manual for Fisher 1800 Tube Receiver unc80 Swap 1 November 30th 04 05:58 AM
<> Echo Sat Info Chuck Equipment 2 July 11th 04 03:50 PM
<> Echo Sat Info Chuck Equipment 0 July 11th 04 04:18 AM
Crosby type 166 Info and Xtals needed JKJsysadm Boatanchors 1 August 22nd 03 08:30 AM


All times are GMT +1. The time now is 08:02 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017