"Joe Bento" wrote in message
news:2010042510495071348-joseph@removespamkirtlandcom...
On 2010-04-11 22:12:49 -0600, Jim_Menning said:


Please don't post with non-standard formats. yEnc is not a favorite
around here. If you want people to appreciate your posts you should post
in a format readily available for all to see, without requiring add-ons
to decode them.

Though according to the documentation for Unison (ver 2.05), an
OS-X -based newsreader, yEnc is understood by all modern newsreaders.

Joe


My newsreader doesn't understand it.

On 2010-04-11 22:12:49 -0600, Jim_Menning said:


Please don't post with non-standard formats. yEnc is not a favorite
around here. If you want people to appreciate your posts you should
post in a format readily available for all to see, without requiring
add-ons to decode them.

Though according to the documentation for Unison (ver 2.05), an OS-X
-based newsreader, yEnc is understood by all modern newsreaders.

Joe

"Spam Hater" wrote in message
news:2010041118435675249-me@privacynet...
On 2010-04-10 10:46:53 -0700, "Pete Bertini" said:

Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck

Pete, see the drawing I posted today under heading BNC Connector. Amphenol part
number 112429, there's a distributor with stock in California. Mouser quoting
10-week leadtime. About $3.



Please don't post with non-standard formats. yEnc is not a favorite around here. If
you want people to appreciate your posts you should post in a format readily
available for all to see, without requiring add-ons to decode them.

Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.

Pete




We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.

On 2010-04-10 10:46:53 -0700, "Pete Bertini" said:

Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck

Pete, see the drawing I posted today under heading BNC Connector.
Amphenol part number 112429, there's a distributor with stock in
California. Mouser quoting 10-week leadtime. About $3.