LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old January 10th 05, 08:52 PM
Tom H
 
Posts: n/a
Default

what would happen if you stuck a security tag on your shoe, set off the
beeper, and refuse to voluntarily accompany security personnel to their
backroom for an 'interview' saying you didn't take anything and you're in a
hurry, causing them to physicaly manhandle you into the office where they
search you (if that was what they did) and find nothing. Assuming they
don't find out you engineered the whole scenario, do you think you would be
able to sue them? would they want to settle out of court? anyone have any
thoughts on this?

"Dave Bushong" wrote in message
...
nana wrote:
Lets not forget, an amateur license carries a higher degree of respect
than does a non licensed device.




With whom? Most people still have no accurate idea what a Ham is!

In regards to this ancient thread - my cellphone has triggered the alarms
at the checkouts more than once. These alarms relied on reradiation of
harmonics and perhaps some non-linear device within the phone did just
that.

The store did not go into an anti-theft frenzy. The girl looked up from
her register, I took my phone off my belt, waved it past the detector, it
beeped, I walked through after it, it didn't beep, problem solved. There
is no big issue here.

Brad VK2QQ



A friend of mine plucked one of those anti-theft plastic doohickeys from a
high-ticket item and stuck it onto the back of my belt and I set off the
detector over and over again as I walked through the exit door.

Some friend.

I wish I had thought of it.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radio ship MV Communicator advertised for sale Mike Terry Broadcasting 1 December 2nd 04 05:57 PM
Radio ship MV Communicator advertised for sale Mike Terry Broadcasting 0 November 29th 04 01:17 AM
Why is my 2watt radio only 0.83watt? advertised output doesn't matchcertification specs. AC/DCdude17 Equipment 3 October 7th 03 03:01 AM
Why is my 2watt radio only 0.83watt? advertised output doesn'tmatch certification specs. Alan Beagley Equipment 5 October 6th 03 07:55 PM
Why is my 2watt radio only 0.83watt? advertised output doesn't match certification specs. Craig Schroeder Equipment 5 October 5th 03 09:53 PM


All times are GMT +1. The time now is 04:08 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017