On April 21 2005, you wrote:

Greetings Clive! I believe what Mike was referring to is that on the
inside of your scanner where the antenna comes in you may well find
that the connection from the coil or board no longer is connected to
the input of the antenna. I have found that the problem on many a
scanner others thought were gone. It is an easy fix if that is it in
most cases. It people connect and disconnect or jiggle the antenna it
can cause them to break the connection. If resoldering is required
and you are not into soldering it might be good to get someone to show
you how to do it. A glob of loose solder on a circuit board can
cause more problems than you now have. Have a great week! Jon.

Jon

I will have a look at it over the weekend. Luckily I am good at
soldering as I repair wris****ches as a hobby and some of these are
quartz that need circuits resoldering I am lucky enough to have a small
workshop with all facilities to do this, I will keep my fingers crossed
and post my findings. I really appreciate the help from the group.
Cheers Clive

--
C S Turnbull
Cheshire
UK
x,com