Home |
Search |
Today's Posts |
#5
|
|||
|
|||
you can use assitional softwarre or hardware on mpt1327 but in facts its not
needed so much as following converations especially on the on site trunk nets is usually quite easy 4/5 freqs,the annoying ones are ones where control ch has been set to change and rotate through the other channels every few mins but if on site all one does is then monitor the input,mobile freq. as far as ican make out thee for example ob that ione is one xontrol and one voice,so in fact all comms on one freq,as you can have single/dual channel or multi channel mpt1327 and not always fully trunking between 3 o more freqs. others are set up so forr 99 per cent of day to day listeninin is on ay 456.6 the voice channel i havve on the above one,but then suddenly a seocnd freq for voice is found because more than usual amount of activity is on the net,then you suddenly find another freq in the trunk net. so just type in the voice channels known of any tunk net and listen,if you then want to use softwae and hardaware for some systems then there are some who are really into that and know a lot more regards,Paul "JC" johncalias-newsgroupsATyahooD0TcoD0Tuk wrote in message ... On Mon, 22 Aug 2005 19:53:04 GMT, "PromaBoss" wrote: 453.77500 460.27500 FM THE MALL SHOPPING CENTRE MPT1237 TRUNK CONTROL CHANNEL ROMFORD ESSEX What type of scanner will pick up the MPT1237 trunked transmissions?? -- Regards John [Essex, UK] Remove the obvious spamtrap to reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Precision signal generator twins, models E-200 & E-400 | Boatanchors | |||
Looking for some info on various Eddystone 1650 models | Boatanchors | |||
Active shortwave antennas for mobile: any new models? | Shortwave | |||
current/inductance discusion | Antenna | |||
FS: YUPITERU MVT-7100E Receiver | Swap |