LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old October 6th 06, 07:11 AM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 68
Default Wellbrook ALA1530+ Vs. ALA100?


wrote in message
ups.com...
Guy Atkins is very lucky to live in what must be one of the quitest RF
environments
around. My home RF level isn't as bad as I had thought, I know see what
real
bad RFI is, but at that there is very little I can hear on a AOR7030+,
R8B, or a R2000.


Yes, it's very quiet here in the Pacific NW, with the fewest "thunderstorm
days" of any place in the continental USA. In mid-winter, with a Western
Beverage antenna at dawn, aimed out over the Pacific Ocean, you'd swear your
receiver was defective, or the antenna broken. In these conditions,
extremely faint tropical band and foreign (TP) mediumwave signals have a
fighting chance to be heard (assuming a top-notch, low noise receiver like a
AR7030 or my current fave, the SDR-1000.

It was under these mid-winter, dawn enhancement conditions that I heard
tantalizing faint signals around 3174 kHz (variable) in the late 1990s,
which had all the clues of Indonesian "amatir" stations. Think: Indo college
kids back home on holiday or weekend breaks, playing non-stop Indo rock
music with flea-powered transmitters, no IDs, often distorted audio, no
official "RRI" news at the top of the hour, etc. I've heard enough of the
real RRI and RPD Indonesian stations to recognize the Indo amatir (pirate)
station. Similarly, I've logged very low power Australian x-band stations
such as Radio Brisvaani, the Hindi station on 1701 kHz (Brisbane,
Queensland). I'd never have a chance to hear this sort of DX, however, at
home in the suburban RF jungle near Seattle-Tacoma. These catches were on
coastal DXpeditions, under ideal conditions.

I do have pretty low noise levels of the RFI, hash-and-buzz sort at home,
due to the underground AC mains. The main problem are the dozen or so MW
stations registering S-9+40 to S-9+60 dB on the SDR's (calibrated) signal
meter. My local 1 kw'er, 1450 KSUH in Puyallup, is a bit over 1 mile from
home. When I had a 700 ft. Beverage antenna aimed at my Asian targets, the
antenna unfortunately was oriented right at KSUH, too. The signal on 1450
from that antenna registered -13 dBm, which is, I believe, around S-9+65 dB.
This is an example of what the trans-Pacific MW stations need to fight
through to be heard in a suburban location like this. So far, I'm finding
the Wellbrook ALA 100 on a rotator does just fine for snagging the foreign
MW DX that makes it through the RF jungle; a Beverage is no advantage.

73,

Guy Atkins
Puyallup, WA
www.sdr-1000.blogspot.com


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wellbrook question [email protected] Shortwave 35 October 2nd 06 06:36 PM
Wellbrook ALA 100 with Rotator - Construction Details Guy Atkins Antenna 4 July 23rd 06 08:49 PM
Wellbrook ALA 100 with Rotator - Construction Details Guy Atkins Homebrew 4 July 23rd 06 08:49 PM
Wellbrook ALA 100 with Rotator - Construction Details Guy Atkins Shortwave 4 July 23rd 06 08:49 PM
Wellbrook Antenna Arrives Jay Shortwave 1 December 10th 05 06:16 PM


All times are GMT +1. The time now is 09:22 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017