Pretty simple really:

A bad day at work + bitterness at ex-girlfriend who screwed around on me +
lots of tequila = Jenni_is_a_Whore

I've used it for awhile, but I have thought for some time that I need to
come up with something different for more "dignified" enviroments.
++++++++++++++++++++++++++
"Stinger" wrote in message
...
Okay, but in return, now you have to tell us how you got your posting name
;^)

-- Stinger
"Jenni_is_a_Whore" wrote in message
news:2Bxmb.5805$d87.2215@okepread05...
BINGO! That was it! I opened up the case and one of the battery power
wires wasn't connected to the header on the circuit board. I was a
little
worried about opening it up because I've never taken one of my radios
apart
before. But it turned out to be an easy repair. I'm a little suprised
by
this since I always heard that Drake's service department ws top notch.
I'll drop them an e-mail today and let them know what happend with my
unit
at their repair facility.

Thanks to all of you for your assistance.
"RHF" wrote in message
om...
JIAW/Anon,

Remove the back of the GS800M. Check the two wires from the batteries
to the main circuit board.

IIRC: There is a mechanical interupt/disconnect switch built into the
External 9VDC Jack on the back of the GS800M; for the ACDC Power
Adapter. There could be a problem with this built-in-switch.


mttidnk ~ RHF
.
.
= = = "Jenni_is_a_Whore"
= = = wrote in message news:cHhmb.4807$d87.2704@okepread05...
I got my Satellit 800 back from R.L. Drake today with a brand new
encoder.
But now, for some reason, I can't get the damn thing to run off the
batteries. They are in there correctly (I know I killed a lot of
brain
cells in college, but still...) I had no problems with the
batteries
before
I sent it off. Could Drake have screwed up something related to the
battery
power supply while fixing the encoder? Also, the "." key is
sticking
a
little bit too, which I also don't remember happening before I sent
it
off.
Does replacement of the encoder require some work with the keypad?

Any comments/suggestions would be appreciated. Thanks.

Here, I changed to my eBay username.
+++++++++++++++++++
"(oatmeal)" wrote in message
news:zDzmb.5811$d87.1326@okepread05...
Pretty simple really:

A bad day at work + bitterness at ex-girlfriend who screwed around on me +
lots of tequila = Jenni_is_a_Whore

I've used it for awhile, but I have thought for some time that I need to
come up with something different for more "dignified" enviroments.
++++++++++++++++++++++++++
"Stinger" wrote in message
...
Okay, but in return, now you have to tell us how you got your posting
name
;^)

-- Stinger
"Jenni_is_a_Whore" wrote in message
news:2Bxmb.5805$d87.2215@okepread05...
BINGO! That was it! I opened up the case and one of the battery
power
wires wasn't connected to the header on the circuit board. I was a
little
worried about opening it up because I've never taken one of my radios
apart
before. But it turned out to be an easy repair. I'm a little
suprised
by
this since I always heard that Drake's service department ws top
notch.
I'll drop them an e-mail today and let them know what happend with my
unit
at their repair facility.

Thanks to all of you for your assistance.
"RHF" wrote in message
om...
JIAW/Anon,

Remove the back of the GS800M. Check the two wires from the
batteries
to the main circuit board.

IIRC: There is a mechanical interupt/disconnect switch built into
the
External 9VDC Jack on the back of the GS800M; for the ACDC Power
Adapter. There could be a problem with this built-in-switch.


mttidnk ~ RHF
.
.
= = = "Jenni_is_a_Whore"
= = = wrote in message news:cHhmb.4807$d87.2704@okepread05...
I got my Satellit 800 back from R.L. Drake today with a brand new
encoder.
But now, for some reason, I can't get the damn thing to run off
the
batteries. They are in there correctly (I know I killed a lot of
brain
cells in college, but still...) I had no problems with the
batteries
before
I sent it off. Could Drake have screwed up something related to
the
battery
power supply while fixing the encoder? Also, the "." key is
sticking
a
little bit too, which I also don't remember happening before I
sent
it
off.
Does replacement of the encoder require some work with the keypad?

Any comments/suggestions would be appreciated. Thanks.