LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old January 7th 04, 03:39 PM
Kenneth
 
Posts: n/a
Default

HFguy wrote in message ...
GrtPmpkin32 wrote:

Sorry for you. At this time no modifications are available for the R8B
flaws [synthesizer phase noise,background hiss,birdies,cheapy
encoder,K'mart keypad ect ect


I am, like DeWayne, the happy owner of an R75, AND I owned a Drake R8B for
three years. The R8B is an awesome receiver, and the problems you're blowing
all out of proportion are as DeWayne says, minor and infrequent (I never ONCE
had a problem with the encoder or tuning knob)...
I have been following your (Kenneth's) current run of tirades for a few days
now, and don't really know what your point has been all along.

snipped

That was the most sensible reply on this subject that I've ever seen.
Congratulations Linus.

Yes sensible like this one :
Yes, I agree... My R8B is a miserable failure as well. Certain parts of
the HF band are totally useless for weak signal work because of the
birdies spaced every 1.5 kc or so. For just a couple of extra bucks
invested in shielding and separate boards they could have had a nice
clean receiver---but Drake was more interested in the profit margin.

I also had the same argument with Drake concerning the birdies. One
fellow did ask if they were in the amateur band and after I said no he
said that's OK!

Besides the other problems I've been having with the R8B a new one just
surfaced; the audio gain control is getting scratchy causing all manner
of grief when I adjust it---guess I need to replace it (only 2 year old)
along with a bunch of other stuff.
A classic.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Icom 730 zero-beat question Michael A. Brown General 2 August 14th 04 12:57 PM
Icom 730 preventative maintenance question Michael Brown Equipment 4 April 26th 04 04:23 AM
Icom 730 preventative maintenance question Michael Brown Equipment 0 April 25th 04 05:46 PM
Newbie question: icom ic-r7000 Steve Uhrig Scanner 0 September 1st 03 06:01 PM
question ICOM PCR-1000 Tomislav Stimac Equipment 0 August 24th 03 10:59 AM


All times are GMT +1. The time now is 04:58 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright Đ2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017