| Home |
| Search |
| Today's Posts |
|
#5
August 27th 04, 11:56 PM
|
|||
|
|||
Jim Douglas wrote: Thanks for the quick response. I was afraid of that answer and the rest of the calibration is way off if I set it to the far right! Back to work I go! Thanks again! What is off on it? "dxAce" wrote in message ... Jim Douglas wrote: Micronta 21-525B. Reading the instructions from the web and it says "Push transmit button and rotate the calibration control until the meters needle aligns with the Cal mark" The problem is the CAL mark is 1" wide , sorta like this, on the right side of the meter. |_______| cal Do you adjust to the beginning of the area, middle or far right where the CAL is printed? The entire CAL area is in red. My guess is all the way to the CAL mark... I seem to remember having one of those. dxAce |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Updated Summer Schedule for Bible Voice Broadcasting | Shortwave | |||
| 10 meter ant impedance at 15 meter | Antenna | |||
| Fwd: Bible Voice A04 Schedule | Shortwave | |||
| Fwd: Bible Voice A04 Schedule | Shortwave | |||
Threaded Mode
