LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #18   Report Post  
Old December 18th 04, 08:52 AM
m II
 
Posts: n/a
Default

Stephen M.H. Lawrence wrote:

Well, if you're handy, conductive spray paint and ferrite beads can be
enormously
helpful - are you experiencing RFI from the CRT?


No interference problems at all. I've been lucky in the computer
components. A TenTec 320 sits about four feet from the right side of
the monitor with NO problems. There is a coax going to the attic and
from there to the end of the house, where a longwire goes to the
garage peak.

Some others haven't been so lucky. I've read of a gentleman who had to
use a much longer serial cable to distance the radio.

I have the coax shield grounded at the connection to the longwire





mike
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP: 2 meter repeater intermod problem from pager transmitters Photoman General 5 December 26th 04 08:27 PM
OT EMI problem with stove and internet connection default Homebrew 4 December 25th 04 10:13 PM
Dots Problem Solved Jim Thornton Shortwave 5 June 24th 04 06:23 PM
*FINALLY* problem solved at Radio Shack.......... Dxluver Shortwave 41 March 16th 04 04:54 AM
National NCX-5 transmit/receive offset problem Chris Equipment 0 July 17th 03 05:29 PM


All times are GMT +1. The time now is 09:57 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017