Here is reply from Drake if anybody interested. I wish I could make
100 bucks an hour fixing radios!

regards,
Bob
N9NEO


************************************************** *********************
The service rate is $25.00 per quarter hour. The average repair time
involved is an hour to two hours. We will align and bring the unit
back to the original specifications. The software, Version 12 is
current. Please enclose a cover letter with your name, address,
telephone number, and a brief description of the fault or reason for
its return. We accept Visa, Master Card, American Express, and
Discover Card.
************************************************** *********************

wrote:
Ok thanks everybody for input. I just sent Drake Email to see what
kind of service they offer. I would like whole unit checked out soup
to nuts. I want to make sure running AOK to present config and so
forth. Unit is very nice and I will probably keep, but if I decide to
sell I would like to tell potential owner that factory has recently
blessed unit.

73
Bob
N9NEO

In article .com,
wrote:

Here is reply from Drake if anybody interested. I wish I could make
100 bucks an hour fixing radios!

regards,
Bob
N9NEO


************************************************** *********************
The service rate is $25.00 per quarter hour. The average repair time
involved is an hour to two hours. We will align and bring the unit
back to the original specifications. The software, Version 12 is
current. Please enclose a cover letter with your name, address,
telephone number, and a brief description of the fault or reason for
its return. We accept Visa, Master Card, American Express, and
Discover Card.
************************************************** *********************

wrote:
Ok thanks everybody for input. I just sent Drake Email to see what
kind of service they offer. I would like whole unit checked out soup
to nuts. I want to make sure running AOK to present config and so
forth. Unit is very nice and I will probably keep, but if I decide to
sell I would like to tell potential owner that factory has recently
blessed unit.

Service is always expensive due to parts and labor costs and shipping
the product back and forth.

1. Labor to effect repair, troubleshooting and replacement of components.
2. Parts and the associated costs of stocking parts.
3. Test equipment, calibrating the test equipment.
4. QA final testing the product to meet specifications.
5. Management costs.
6. Shipping and boxing.

Lots of ways to spend money to support repairing a product.

--
Telamon
Ventura, California

Yes I agree Telamon. A good service bureau is an expensive
proposition. The ones I am familiar with (industrial based) barely
break even after salaries are paid. The important thing here is that
somebody is getting paid a salary. I would think the consumer market
is even worse. I suppose that is why so many mom & pop tv radio shops
are gone now. It's a shame.

73
Bob
N9NEO

wrote:
Yes I agree Telamon. A good service bureau is an expensive
proposition. The ones I am familiar with (industrial based) barely
break even after salaries are paid. The important thing here is that
somebody is getting paid a salary. I would think the consumer market
is even worse. I suppose that is why so many mom & pop tv radio shops
are gone now. It's a shame.

73
Bob
N9NEO



If there were a demand for the mom and pop repair shops they would still
be around. However radios and TVs no longer need to have tubes replaced
on a regular basis. Without that business there is little for them to
do. Combine that with generally decreasing prices for electronic
products and it becomes advantagous for folks to replace rather than repair.

craigm

craigm wrote:
wrote:

Yes I agree Telamon. A good service bureau is an expensive
proposition. The ones I am familiar with (industrial based) barely
break even after salaries are paid. The important thing here is that
somebody is getting paid a salary. I would think the consumer market
is even worse. I suppose that is why so many mom & pop tv radio shops
are gone now. It's a shame.

73
Bob
N9NEO



If there were a demand for the mom and pop repair shops they would still
be around. However radios and TVs no longer need to have tubes replaced
on a regular basis. Without that business there is little for them to
do. Combine that with generally decreasing prices for electronic
products and it becomes advantagous for folks to replace rather than
repair.

craigm


I agree. When I was knee-high (mid fifties) TV repair shops were
swamped with work, and many "8 to 4:30" guys studied nights to learn TV
repair, and made it into a lucrative sideline. The original TV chassis
(save the Muntz, for one) had around 32 tubes on the board besides the
CRT. They were in the shop three, sometimes four times a year as a
matter of course, as they slowly cooked themselves to death. People
accepted it as part of the miracle of "pictures through the air".
Madman Muntz designed a 17 tube chassis (some double duty some cut
corners) and they were very reliable sets - maybe into the shop once or
twice a year (we had one for years).

Craig M is right - Assuming they pass the "infant mortality" stage,
todays electronics last about exactly as long as it takes for people to
*want* a new one - for better features or whatever reason.

Tony

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Tony Meloche wrote:
craigm wrote:
wrote:

Yes I agree Telamon. A good service bureau is an expensive
proposition. The ones I am familiar with (industrial based) barely
break even after salaries are paid. The important thing here is that
somebody is getting paid a salary. I would think the consumer market
is even worse. I suppose that is why so many mom & pop tv radio shops
are gone now. It's a shame.

73
Bob
N9NEO



If there were a demand for the mom and pop repair shops they would still
be around. However radios and TVs no longer need to have tubes replaced
on a regular basis. Without that business there is little for them to
do. Combine that with generally decreasing prices for electronic
products and it becomes advantagous for folks to replace rather than
repair.

craigm


I agree. When I was knee-high (mid fifties) TV repair shops were
swamped with work, and many "8 to 4:30" guys studied nights to learn TV
repair, and made it into a lucrative sideline. The original TV chassis
(save the Muntz, for one) had around 32 tubes on the board besides the
CRT. They were in the shop three, sometimes four times a year as a
matter of course, as they slowly cooked themselves to death. People
accepted it as part of the miracle of "pictures through the air".
Madman Muntz designed a 17 tube chassis (some double duty some cut
corners) and they were very reliable sets - maybe into the shop once or
twice a year (we had one for years).

Craig M is right - Assuming they pass the "infant mortality" stage,
todays electronics last about exactly as long as it takes for people to
*want* a new one - for better features or whatever reason.

Tony

Back then TV sets were very expensive and not particularly reliable.
Tubes went out, tuners needed cleaning and the early color sets seemed
to need frequent realigning. A TV nice TV set with far more features
than the sets of the 1950's costs a lot less and is highly reliable.
When a new CRT set finally does die the replacement cost is usually
equal to the price of a new one.

Does anyone know if there are repair shops for the still pricey plasma
and lcd sets?

Madman Muntz manufactured some Automobiles too.
cuhulin

wrote:
Madman Muntz manufactured some Automobiles too.
cuhulin



Yes - I believe I even read he was into Formula One racing for a few
years. He was like that - he was a cockeyed genius, but he had a
restless intellect. After adopting something and mastering it, he got
bored and went on to something else.

Tony

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Tony Meloche wrote:

I agree. When I was knee-high (mid fifties) TV repair shops were
swamped with work, and many "8 to 4:30" guys studied nights to learn TV
repair, and made it into a lucrative sideline. The original TV chassis
(save the Muntz, for one) had around 32 tubes on the board besides the
CRT. They were in the shop three, sometimes four times a year as a
matter of course, as they slowly cooked themselves to death. People
accepted it as part of the miracle of "pictures through the air".
Madman Muntz designed a 17 tube chassis (some double duty some cut
corners) and they were very reliable sets - maybe into the shop once or
twice a year (we had one for years).

Craig M is right - Assuming they pass the "infant mortality" stage,
todays electronics last about exactly as long as it takes for people to
*want* a new one - for better features or whatever reason.

Tony


Yes, there were a lot of "Tube changers" out there who called
themselves TV repairmen. At one time there were over 50 so called "TV
shops in Middletown Ohio. Only a few could really troubleshoot a TV set
with real problems, and they were the ones who were in business till a
few years ago. Now, there isn't one shop left in a town of over 50,000
people. In the '70s it cost around 10,000 to equip a van for TV service
calls, unless all you did was pick up the TV and haul it to the shop for
the bench techs to work on. I ran some TV shops in the late '70s and
saw the costs. It was over $100 in taxes and insurance just to open the
doors of a shop that didn't have a mortgage or rent payment. Then you
had to make enough money to pay the wages, buy parts, pay for the phone
and gasoline. Basically, you had to take in about 300 a day to keep the
doors open, and a TV service call was $17.50, for the trip and first
half hour, plus 17.50 per hour after that.

--
?

Michael A. Terrell
Central Florida

I paid about $276.00 for my RCA tv set at a Wal Mart store on October
15,1999.The same model 27 inch screen RCA tv sets nowdays are about
$174.00 at the Wal Mart stores.
cuhulin