Home |
Search |
Today's Posts |
#20
![]() |
|||
|
|||
![]() "Michael Coslo" wrote in message ... snip Time to call the cable company and tell them you want your MTV. No way to know from here, but they may not be able to add another amp. While I was looking for something else, I lurched into this page: http://www.cisco.com/en/US/products/hw/cable/ps2217/products_white_paper0900aecd800fc94c.shtml While its intended audience is Internet modem designers, the noise discussions are informative with regard to other signals, too. My point: When you try stringing too many amps in line, the signal-to-noise ratio (SNR) eventually becomes unacceptable. (Remember the acceptable SNRs cited for 256 QAM and 64 QAM.) "Sal" |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Tecsun PL-310 Signal Strength Metering | Shortwave | |||
What's Your Signal Strength? | Shortwave | |||
Signal Strength Suggestions | Antenna | |||
APRS and signal strength.. | Homebrew | |||
APRS and signal strength.. | Homebrew |