Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 13th 12, 01:44 AM posted to sci.electronics.repair,rec.radio.amateur.antenna,sci.electronics.design
external usenet poster
 
First recorded activity by RadioBanter: Mar 2010
Posts: 23
Default Increasing Cable TV signal strength MoCA

zzzzzzzzzz wrote:
On Sun, 12 Feb 2012 13:54:36 -0800, Joerg wrote:

Michael A. Terrell wrote:
Joerg wrote:
Michael A. Terrell wrote:
? Joerg wrote:
??
http://www.cablefax.com/ct/sections/...ier_44237.html
??
?? Quote "The Multimedia Over Coax Alliance (MoCA) provides a standard ..."
??
?? then
??
?? Quote "The maximum cable distance supported between the root and the
?? last outlet is 300 feet, with a maximum attenuation of 25 dB". And this
?? is for MoCA, not just cable TV.
?
?
? MoCA is home networking, hence the 300 foot figure. A drop at +10
? dBmv already allows a 25 dB loss for the cable modem, since they are
? designed to work to -15 dBmv. That webpage also mentions verifing that a
? "drop amplifier does not block Moca". In other words, it's home
? networking for multimedia devices and has nothing to do with the length
? of the cable drop. It is to allow customers to stream audio and video
? within their home, and use services like Netflix ? Hulu on their TV
? sets.
?

It is the modern cable TV, like it or not.

Sigh. You never back down, even when you are shown that you are
wrong.


Because I am not.

http://publicservice.vermont.gov/con...rts_cable.html

Quote "If its under 300 feet, its free to the consumer".

Yes, it is as simple as that. You are within 300ft and the cable company
must serve you. This is state-of-the-art. Now you'll probably declare
the whole State of Vermont to be wrong?


The whole state? Na, there's probably three sane people left.



:-)

But it's everywhere. Here is an example from South Carolina about what
happens when a company wants to push through a sub-par 125ft and the
city insists state-of-the-art 300ft:

http://www.redorbit.com/news/technol...any_agreement/

They threatened to not renew the franchise. And this was six years ago.

--
Regards, Joerg

http://www.analogconsultants.com/
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tecsun PL-310 Signal Strength Metering Richard Fry Shortwave 4 May 17th 10 10:58 PM
What's Your Signal Strength? Chuck Shortwave 4 October 6th 04 10:51 PM
Signal Strength Suggestions Nickolas Antenna 4 August 30th 04 04:53 PM
APRS and signal strength.. Joel Homebrew 0 January 4th 04 11:13 PM
APRS and signal strength.. Joel Homebrew 0 January 4th 04 11:13 PM


All times are GMT +1. The time now is 12:56 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017