On Fri, 7 Dec 2012 07:17:13 -0800 (PST), JIMMIE
wrote:

I am looking for tutorial information on cutting coaxial
cables to various electrical phase lengths.

http://www.belden.com/pdfs/Techpprs/Wireless%20Market%20Web%20Phase%20Paper.pdf

I also used to use a slotted line for generating a phase reference at
RF frequencies. It's then just a matter of comparing your cut coax
phase shift with that from the slotted line. A telescoping coax cable
section might also work, but I've never tried it. Accuracy was kinda
low, but good enough for what I was doing.


--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558