Home |
Search |
Today's Posts |
#31
![]() |
|||
|
|||
![]()
Richard:
One important use of the "coil" is a "choke", I'd hate to try to get a signal though a direct short of the center conductor to the shield... Warmest regards, John -- When Viagra fails to work--you are DOOMED!!! "Richard Clark" wrote in message ... | On Mon, 9 May 2005 13:15:57 -0700, "John Smith" | wrote: | | And, for Richard, BOTH leds share a common current source through the FET... | | Hi Brett, | | And seeing you are tied directly to the feedline, that hosepipe is | going to supply every bit of what that FET can limit. | | Hard to imagine they will EVER turn off. This is just a brighter | brake light flasher. | | What's the coil for, anyway? | | 73's | Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: MFJ 941D Antenna Tuner + MFJ 204B Antenna Bridge + MFJ 202B Noise Bridge | Shortwave | |||
FS: MFJ 941D Antenna Tuner + MFJ 204B Antenna Bridge + MFJ 202B Noise Bridge | Swap | |||
Bridge Megger Tester. Series 2. 500 Volt. | Boatanchors | |||
FS: E.F. Johnson Phone Patch and SWR Bridge, Gonset CPO | Equipment | |||
FS Tennatest RF Noise Bridge 1-150 MHz | Swap |