| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
On Fri, 23 Dec 2005 19:30:25 -0500, Scott in Baltimore
wrote: + I don't think so, only because I have seen flat ground planes. My Starduster + were at a sharp angle. Maybe Scott can knows better. I would think the flat or + GP at 90 degrees to the center conductor is fine. + +Straight radials would create a 30 ohm antenna. +45 degree droops create about 50 ohms. + +There shouldn't be any current flowing down the outside of the +shield with a groundplane, so you won't need a balun, +unlike a dipole that requires equal and opposite phases. +If you try to feed a dipole with coax, the outer shield +becomes part of the antenna system, causing high SWR readings, +(even if the SWR is low), RF interference and degraded performance. ****** At 30 Ohms you will need some matching network to cancel the reactive portion out and rasie the radiation resistance of the antenna up to that of 50 Ohms. I would not reccomend direct coax attachment even to a 1/4 lambda ground plane antenna. james |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| On Topic | Shortwave | |||
| ABOUT - Making a SWL Antenna out of 300 Ohm Twin Lead and TV Coax Cable | Shortwave | |||
| Antenna Advice | Shortwave | |||
| The main problem with Ham radio... | Policy | |||
| Outdoor Antenna and lack of intermod | Scanner | |||