| Home |
| Search |
| Today's Posts |
|
#1
October 24th 06, 12:52 AM
posted to rec.radio.amateur.equipment
|
|||
|
|||
kenwood 450s problem.
Hi,
I seem to have a problem with my kenwood 450s. I can transmit fine on 80 and 40 meters but when I go to 20 nothing plus there is what sounds like an echo when I try to transmit. The antenna tuner says the SWR is Ok. I use a G5RV antenna and thought that this may be the problem. I have just installed an "ENDFEDZ" 20m end fed dipole, the results are the same. I can receive OK and there is no difference on the transmit side when I bypass the tuner and connect either antenna directly to the radio. Any help / suggestions would be gratefully appreciated. Many thanks Ian VA3SOF |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Kenwood TS-520 problem | Boatanchors | |||
| FS: Kenwood TH-D7A(G) Dual Band Ham Radio HT TS-2000 Sky Command | Swap | |||
| Kenwood TM-732A Display Problem | Equipment | |||
| FS: Kenwood Mikes and Transceive Cable for Twins | Equipment | |||
| Kenwood TS570 support ? | Equipment | |||
Threaded Mode
