Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
On Wed, 12 Sep 2007 21:33:58 -0400, Jerry wrote:
Two known issues with this radio. If the radio is remoted, check to see that the little screw that fastens the remote cable is secured to the body of the radio. This is VERY important! Make sure it is TIGHT. This will shut the radio off as RF will get into it via the non-shielded cable (without the little screw) if the screw is omitted or loose. Hi, Jerry. I have used my IC-706 mobile in a car, truck, motorcycle, and airplane, always with the remote and cable, and have never yet used the screw to hold it in. Never had a problem. It will shut itself off due to low voltage, though. Had that happen many times when using it in the shack on an AGM battery. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Grundig and Eton Not Powering Up-Help! | Shortwave | |||
powering R75 with a battery | Shortwave | |||
Powering Condenser Mic with Capacitor | CB | |||
Powering DX394 with batteries | Shortwave | |||
Powering a BC669D | Boatanchors |