LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old May 5th 09, 05:18 AM
Senior Member
 
First recorded activity by RadioBanter: Oct 2005
Posts: 156
Default

Quote:
Originally Posted by MHM View Post

Should a 08 with an Infinity system receive signals in the 2.5 mV/m range without any problems? Should it receive signals in the .5 mV/m range without any problems? How about at .15 mV/m? I’m not getting good reception within the 2.5 mV/m range. (Note: I understand AM reception fluctuates with the weather and nearby interference, but I’m not talking about that.) At about what signal strength (mV/m) should I start to experience issues since in some cases there is a large gap between the 2.5 mV/m and .5 mV/m contours?

The dealer has been trying to tell me that since few people listens to AM anymore, the stations haven’t invested to keep their signal strength up to the max and nobody gets good reception anymore. They are also telling me that HD radio is causing the problem but I’m experiencing the problem across the dial and the symptoms don’t match what I’ve found on the internet. I’ve been amazed that they can make statements like that with a straight face.

It should be noted that I get more noise on the radio when tuned to a weak signal with the engine on but it’s not the high pitch noise that changes with engine speed. I also get additional noise sometimes when passing under residential power lines. I’m not talking large power distribution lines, I’m talking about local neighborhood power lines.

Thanks for any help you can give me.
Your radio system has a problem, and your dealer is blowing you off.

You should copy signals in the .5 mv range with only minor "static".

Try a different dealer.
__________________
The Man in the Maze
QRV at Baboquivari Peak
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radio for VHF UHF weak signal DX Martin g1gyc Dx 11 June 25th 08 09:24 PM
Radio for VHF UHF weak signal DX Martin g1gyc Equipment 8 June 21st 08 09:45 PM
Composite Signal from Radio Receiver HardwareMonkey Equipment 3 February 7th 07 03:08 PM
radio australia signal is weak weatherall Shortwave 11 November 30th 06 04:23 PM
Signal to noise in re.radio.shortwave Telamon Shortwave 8 September 5th 05 02:37 AM


All times are GMT +1. The time now is 03:07 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017