Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Power Pole Connectors
"Brian Reay" wrote in message ... There are at least two types. One is simply a couple of E shaped metal plates. The centre of the E goes into the small hole, the connector body fits in the gaps. You can stack connectors and put one plate at each end. This type are very cheap. I don't think I have seen that kind, or if I did only one set of the PPs were installed that way. I would like for someone to come out with about 8 or 10 sets on a plate for cheap price, not the $ 50 or more for them that I have seen. Years ago I made up a plate to go on the back of my radio desk which resembles a computer desk that has several sets of bannana jacks on it that works ok, but have to just use wires or the spade lugs on it. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Power Pole Connectors | Equipment | |||
Help - Heathkit GR-78 Rx - power connectors | Boatanchors | |||
Power Pole Fuse Blowing Out, audio | Shortwave | |||
Power pole connectors | General | |||
Source for Yaesu Power Cable Connectors? | Equipment |