Home |
Search |
Today's Posts |
#15
|
|||
|
|||
Mobile Power Connector choices?
A quick note Power Poles and mobile operation.
Use the smallest cable tie to hold the two connectors together as they sometimes have a tendency to shake / pull apart. Bill - WB1GOT On Tue, 18 Dec 2007 10:09:13 EST, KC4UAI wrote: It's not been an issue for me until this Christmas when my wife decided to get me a VHF/UHF mobile rig. I've been using an older Icom 2 meter rig in both the cars for years so both cars have Icom power cables in place, but the new rig doesn't use the same power connectors. I'd like to settle on a common power connector for both the radios, but I'm not all that sure where to go to find something that is reasonably priced and is not going to disappear in the future and force me to go out and buy all new connectors again. I figured I'd not remove any of the existing connectors on the radios, but build up short jumpers that adapt to the connector of choice. I also figured that I'd use the existing power wires by replacing the current Icom power connector with what ever I pick. Any suggestions on what to use and where to get them? -= bob =- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: TR-4 xcvr power connector | Boatanchors | |||
TCS power connector | Boatanchors | |||
WTB: Power connector for BC 260 | Swap | |||
FA: New BC-348 Power Connector | Boatanchors | |||
FRG-100 What power connector ? | Homebrew |