Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
In article , Radio Amateur KC2HMZ
writes: is required, there will be people whining and complaining about having to prepare for it and take it in order to obtain a license in whatever's left of the ARS. I feel compelled to point out that such negativity is not likely to have a positive effect on "whatever's left of the ARS" and to remind once again that anyone who is not a part of the solution is a part of the problem. John: This is not "negativity," just a plainly truthful assessment of the present situation regarding licensing standards in the ARS. So, we'll change the debate over to whether or not the ARS is a "technical" service and whether the testing should be changed into something more dumbed-down than it already is. Every time I hear someone lamenting the supposed dumbing down of the ARS, I can't help but think of the number of longtime hams I've seen over the past few years who brought a brand new 2m or dual-band mobile or HT, or an Icom 706MKIIG or Yaesu FT-100 into a club meeting to seek help in programming it. I know what you're talking about -- and I'll concede up front that a lot of these technically-inept OT's are 20 WPM Extras to boot! However, I have always strove to keep up with the times as far as basic technical knowledge is concerned -- and not just the bare minimum required to keep beeping or yakking. I have always been involved in digital modes, for instance, and now use them more than CW! I have been my club's "Digital Mode Captain" for the past four Field Days, and will try to pass that job over to some newcomer next year, if only I could find one willing to open some books and turn some pages to learn everything I have -- instead of being "Elmered" with "hands on" training which only gives them the basic operational procedure and none of the background. I'm not talking about relative newcomers either, I'm talking about guys who were hams before I was even born. Yup, I know. They're a real problem, all right. Usually the leaders of the "Don't PL our repeater" pack of whiners. Furthermore, sometimes it's a no-code Tech who picks up the old-timer's HT and shows him how to program it. Sometimes, but certainly not often enough. The No-Code Techs are at the top of the list of the technically inept, in spite of their protests to the contrary. Never mind that the HT's owner could have learned this for himself by reading the manual, because many manufactuers' manuals leave a lot to be desired, and we're talking about guys who once built microphones out of tuna fish cans and can do 40WPM or better in their sleep. Quite frankly, the tuna fish-can mics didn't sound that great, and the 40 WPM in their sleep would have sounded a lot better if they had used 25 WPM while wide awake. How are we supposed to be dumbed down if guys who have been extras since Moby Dick was a minnow need help from another ham to get a new piece of equipment operating? And how are we supposed to be dumbed down when it turns out to be a guy with a license the ink isn't even dry on yet that is able to provide that assistance, and is happy to do so? I'm not buying the dumbed-down theory one bit. This has always been the case, John -- I was one of the "technical nerds" when I was a newcomer ham as well -- much to the dismay of the OT's in my first club. And I don't claim to be a technical genius or anything like it -- I have strictly "amateur" technical skills. I am, however, technically self-sufficient as far as my own station set-up and operation is concerned, and I have enough know-how to maintain our club's repeaters, do all our computer logging for Field Day and other contests, etc. etc. I don't disagree with you whatsoever about the technical abilities of hams past or present. However, I don't assign that technical inability to knowledge of the Morse code, either. The two are not related, no matter how hard the no-coders struggle to make that very same connection in their arguments. After that, the next bone of contention will be whether or not a prospective ham should be required to know how to spell his name correctly on the application! If he can't, he gets a license that doesn't have his name on it and is therefore invalid, doesn't he? Dang it, John, you got it first time! You're a real fart smeller! Er, I mean, smart feller! BTW, Larry, you were supposed to look me up when you came up this way, I still owe you a roast beef from a bet we made several years ago and you haven't even bothered to collect your winnings. My apologies. I don't even remember the bet. I guess my brain is too full of Morse code knowledge to retain such things, eh? Please refresh my memory! 73 de Larry, K3LT |