| Home |
| Search |
| Today's Posts |
|
#5
October 19th 04, 11:37 AM
|
|||
|
|||
"Michael" wrote in message ...
Sorry, but I learned this the hard way too...the micro-pro lost it's mind. I'd recommend you re-set the unit as per manual. As on some Alinco units, you may be able to "re-set" the CPU without disrupting your pre-progged memory. At very worst, you'll have to re-program the radio - but it might be worth a try. My credentials? I'm no radio expert, but I've worked with cpu devices for about 20 years. Sometimes a simple 're-set' / Power Cycle / or cold re-boot make every problem go away. Good luck, Mike T. "Dave Drummer" wrote in message om... (Jeff Multer) wrote in message ... Are you using software to program the 250D ? No, I programed it directly. could you tell me how to reset the CPU? Ive tried a memory clear, so I have nothing to lose. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Strange Problem With HT - Help! | Equipment | |||
| Strange Problem With HT - Help! | Equipment | |||
| Strange Problem With HT - Help! | Equipment | |||
| TS-940 strange problem | Equipment | |||
| TS-940 strange problem | Equipment | |||
Threaded Mode
