Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Grundig YB400PE
Hello All
I have the above radio this radio worked great the hole time I've had it. So about 2 years ago i put it away because I wasn't using it I took batteries out before putting it away. Last week I took this radio out to use it I put new batteries in it turned it on to a FM station in area but no sound and no signal on meter. So I am wondering if anybody would know what is causing this. Thanks Again All help is appreciated TD |
#2
|
|||
|
|||
Grundig YB400PE
On Thursday, February 9, 2017 at 7:12:31 PM UTC-5, Terry Deslippe wrote:
Hello All I have the above radio this radio worked great the hole time I've had it. So about 2 years ago i put it away because I wasn't using it I took batteries out before putting it away. Last week I took this radio out to use it I put new batteries in it turned it on to a FM station in area but no sound and no signal on meter. So I am wondering if anybody would know what is causing this. Thanks Again All help is appreciated TD Make sure the polarity is observed correctly... |
#3
|
|||
|
|||
Grundig YB400PE
On Thursday, February 9, 2017 at 6:12:31 PM UTC-6, Terry Deslippe wrote:
Hello All I have the above radio this radio worked great the hole time I've had it. So about 2 years ago i put it away because I wasn't using it I took batteries out before putting it away. Last week I took this radio out to use it I put new batteries in it turned it on to a FM station in area but no sound and no signal on meter. So I am wondering if anybody would know what is causing this. Thanks Again All help is appreciated TD Have you pushed the reset button? It's located on the front of the radio, gently poke an opened paper clip into it. |
#4
|
|||
|
|||
Grundig YB400PE
On Thursday, February 9, 2017 at 7:12:31 PM UTC-5, Terry Deslippe wrote:
Hello All I have the above radio this radio worked great the hole time I've had it. So about 2 years ago i put it away because I wasn't using it I took batteries out before putting it away. Last week I took this radio out to use it I put new batteries in it turned it on to a FM station in area but no sound and no signal on meter. So I am wondering if anybody would know what is causing this. Thanks Again All help is appreciated TD Yes i have pushed the reset button nothing changes.. Thanks |
#5
|
|||
|
|||
Grundig YB400PE
Have you tried powering it on with AC? Or a different set of batteries? |
#6
|
|||
|
|||
Grundig YB400PE
On Friday, February 10, 2017 at 11:21:08 PM UTC-5, wrote:
Have you tried powering it on with AC? Or a different set of batteries? The set needs a 9V DC external power adapter . The tip is NEGATIVE(-)! |
#7
|
|||
|
|||
Grundig YB400PE
|
#8
|
|||
|
|||
Grundig YB400PE
I plugged the power cord in it still doesn't work
|
#9
|
|||
|
|||
Grundig YB400PE
Yes I've tried plugging the 9 volt power cord in it still doesn't work.
Thanks for the reply |
#10
|
|||
|
|||
Grundig YB400PE
Yes I've plugged the power cord in it still doesn't work
Thanks for replying |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Grundig YB400PE | Equipment | |||
Grundig YB400PE | Shortwave | |||
Grundig YB400PE | Shortwave | |||
Grundig YB400PE | Shortwave | |||
Grundig YB400PE Mods?? | Shortwave |