LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #18   Report Post  
Old July 1st 04, 01:37 PM
Diverd4777
 
Posts: n/a
Default

In article , "coustanis"
writes:

Subject: Excuse me. Do you *really* need a license?
From: "coustanis"
Date: Wed, 30 Jun 2004 21:15:08 -0400


"Corwin, Prince of Amber" wrote in message
.. .
On Wed, 30 Jun 2004 06:01:20 GMT, "Corwin, Prince of Amber"
wrote:

All right. I get the idea. Thanks. My radio is up at my house in
the Pocono Mountains, PA, not where I live here in NYC, so I suppose
I'll buy an antenna (good grief, not I've got to figure *that* out!)
and see if I can hear anyone talking. If I get reception I'll put in
the time and effort to understand what I'm doing. Thanks again. I'll
let you know if I succeed.

I never even considered leaving the radio here in my apartment. You
can't just stick the antenna out an open window and expect to get
results, right, or can you . . ?

Absolutly you can.


Stealth Apartment Antenna design & construction procedures..
__________________________________________________ ______

MATERIALS

Some Stranded, Insulated copper wire from Radio shack
Colors so it matches the bricks / outside of your building

Some stick-on Cord holders
One tube clear Silicone sealer glue
One black magic marker

A roll of Duct tape color of outside of apt.

One Mop
One piece of twine or string.
One Small soft edged weight.

PROCEDU

See how far it is in between two windows of your Apt..

Measure out a piece of string this distance + ~ 6 - 8 feet.
Attach a small soft edged weight to it.

( Look Outside to see no one is looking !! )

Secure curious household pets

Open Both Windows.
Insert mop part way out one]
Close that window to secure mop handle

Run over to the other window QUICK!
Take the twine with the weight on it & (without risking life & limb)
Toss the string over the mop sticking out the other window.
Secure the end of that end of the string with a bit of slack
Close that window
Run over to the other window with the mop that has the twine handing down off
it

Pull the mop in
Close the window.

( Breath deeply )

NOW....

Attach the stranded wire to the end of the string.
Slightly open window
Run over to the oher window.
Open it & pull in string until wire / string connection is through..

Pull in enough so that wire will reach SWR
Attach wire to SWR.
Close window.

- That's basically it. Modify as needed.

You can take Square stick -on cord holders
Camouflage them with magic Marker color , &
Silicone glue them to the outside corners of the window,
Then loop more wire

( DONT FALL OUT WHEN DOING THIS !!)

around the cord holders. This makes the antenna longer.
repeat for other windows..This should help lots..

( Works for me !!)





 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ARRL Propose New License Class & Code-Free HF Access Lloyd Mitchell Antenna 43 October 26th 04 01:37 AM
Response to "21st Century" Part Two (Communicator License) N2EY Policy 0 November 30th 03 01:28 PM
Low reenlistment rate charlesb Policy 54 September 18th 03 01:57 PM
Hey CBers Help Get rid of Morse Code Test and Requirement Scott Unit 69 Policy 9 August 1st 03 02:08 AM
Hey CBers Help Get rid of Morse Code Test and Requirement ROLDAIGNAULT CB 22 July 31st 03 12:54 AM


All times are GMT +1. The time now is 01:23 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017