Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 12th 05, 01:15 AM
Tony Meloche
 
Posts: n/a
Default

craigm wrote:
wrote:

Yes I agree Telamon. A good service bureau is an expensive
proposition. The ones I am familiar with (industrial based) barely
break even after salaries are paid. The important thing here is that
somebody is getting paid a salary. I would think the consumer market
is even worse. I suppose that is why so many mom & pop tv radio shops
are gone now. It's a shame.

73
Bob
N9NEO



If there were a demand for the mom and pop repair shops they would still
be around. However radios and TVs no longer need to have tubes replaced
on a regular basis. Without that business there is little for them to
do. Combine that with generally decreasing prices for electronic
products and it becomes advantagous for folks to replace rather than
repair.

craigm



I agree. When I was knee-high (mid fifties) TV repair shops were
swamped with work, and many "8 to 4:30" guys studied nights to learn TV
repair, and made it into a lucrative sideline. The original TV chassis
(save the Muntz, for one) had around 32 tubes on the board besides the
CRT. They were in the shop three, sometimes four times a year as a
matter of course, as they slowly cooked themselves to death. People
accepted it as part of the miracle of "pictures through the air".
Madman Muntz designed a 17 tube chassis (some double duty some cut
corners) and they were very reliable sets - maybe into the shop once or
twice a year (we had one for years).

Craig M is right - Assuming they pass the "infant mortality" stage,
todays electronics last about exactly as long as it takes for people to
*want* a new one - for better features or whatever reason.

Tony

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
  #2   Report Post  
Old September 12th 05, 02:02 AM
John S.
 
Posts: n/a
Default


Tony Meloche wrote:
craigm wrote:
wrote:

Yes I agree Telamon. A good service bureau is an expensive
proposition. The ones I am familiar with (industrial based) barely
break even after salaries are paid. The important thing here is that
somebody is getting paid a salary. I would think the consumer market
is even worse. I suppose that is why so many mom & pop tv radio shops
are gone now. It's a shame.

73
Bob
N9NEO



If there were a demand for the mom and pop repair shops they would still
be around. However radios and TVs no longer need to have tubes replaced
on a regular basis. Without that business there is little for them to
do. Combine that with generally decreasing prices for electronic
products and it becomes advantagous for folks to replace rather than
repair.

craigm



I agree. When I was knee-high (mid fifties) TV repair shops were
swamped with work, and many "8 to 4:30" guys studied nights to learn TV
repair, and made it into a lucrative sideline. The original TV chassis
(save the Muntz, for one) had around 32 tubes on the board besides the
CRT. They were in the shop three, sometimes four times a year as a
matter of course, as they slowly cooked themselves to death. People
accepted it as part of the miracle of "pictures through the air".
Madman Muntz designed a 17 tube chassis (some double duty some cut
corners) and they were very reliable sets - maybe into the shop once or
twice a year (we had one for years).

Craig M is right - Assuming they pass the "infant mortality" stage,
todays electronics last about exactly as long as it takes for people to
*want* a new one - for better features or whatever reason.

Tony

Back then TV sets were very expensive and not particularly reliable.
Tubes went out, tuners needed cleaning and the early color sets seemed
to need frequent realigning. A TV nice TV set with far more features
than the sets of the 1950's costs a lot less and is highly reliable.
When a new CRT set finally does die the replacement cost is usually
equal to the price of a new one.

Does anyone know if there are repair shops for the still pricey plasma
and lcd sets?

  #3   Report Post  
Old September 12th 05, 01:52 AM
 
Posts: n/a
Default

Madman Muntz manufactured some Automobiles too.
cuhulin

  #5   Report Post  
Old September 12th 05, 05:10 AM
Michael A. Terrell
 
Posts: n/a
Default

Tony Meloche wrote:

I agree. When I was knee-high (mid fifties) TV repair shops were
swamped with work, and many "8 to 4:30" guys studied nights to learn TV
repair, and made it into a lucrative sideline. The original TV chassis
(save the Muntz, for one) had around 32 tubes on the board besides the
CRT. They were in the shop three, sometimes four times a year as a
matter of course, as they slowly cooked themselves to death. People
accepted it as part of the miracle of "pictures through the air".
Madman Muntz designed a 17 tube chassis (some double duty some cut
corners) and they were very reliable sets - maybe into the shop once or
twice a year (we had one for years).

Craig M is right - Assuming they pass the "infant mortality" stage,
todays electronics last about exactly as long as it takes for people to
*want* a new one - for better features or whatever reason.

Tony



Yes, there were a lot of "Tube changers" out there who called
themselves TV repairmen. At one time there were over 50 so called "TV
shops in Middletown Ohio. Only a few could really troubleshoot a TV set
with real problems, and they were the ones who were in business till a
few years ago. Now, there isn't one shop left in a town of over 50,000
people. In the '70s it cost around 10,000 to equip a van for TV service
calls, unless all you did was pick up the TV and haul it to the shop for
the bench techs to work on. I ran some TV shops in the late '70s and
saw the costs. It was over $100 in taxes and insurance just to open the
doors of a shop that didn't have a mortgage or rent payment. Then you
had to make enough money to pay the wages, buy parts, pay for the phone
and gasoline. Basically, you had to take in about 300 a day to keep the
doors open, and a TV service call was $17.50, for the trip and first
half hour, plus 17.50 per hour after that.

--
?

Michael A. Terrell
Central Florida


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: Drake 2A/2B Receiver Main Tuning Knob Jim Barnard Swap 0 February 25th 05 12:38 AM
The Eton 'Elite' E1 XM Radio "Genealogy" Drake SW1 > SW2 > SW8 > GS800M > E1 XM RHF Shortwave 1 January 7th 05 03:16 AM
FA - R. L. Drake SW8 'portable' World Band Shortwave Communications Receiver RHF Shortwave 7 January 4th 05 03:00 AM
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) Jon Noring Shortwave 103 June 30th 04 07:13 PM
FS: Hallicrafters HT-4 Transmitter Tuning Units $30 Alpha_Fox_Four_Kilo Boatanchors 0 October 18th 03 01:25 PM


All times are GMT +1. The time now is 05:28 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017