LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old April 19th 09, 05:08 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Aug 2008
Posts: 53
Default Hardware suggestions for mounting several antennas?

Pretty much what I did was use a 48" piece of Flex-Angle as the horizontal
piece. On one end of the flex I mounted an Arrow 2m/70cm J-pole antenna and
on the opposite end of the flex I mounted the Arrow 6M ground plane. I then
mounted the flex-angle perpendicular to the mast with 2 U-bolts. Several
diffent antennas could be mounted on the mast at different levels. I used
the MFJ antenna analyzer on each antenna and they check great and also work
great. I used the Arrow antennas because if there is such a thing as a
bullet proof antenna Arrow builds them. Rollie KD0-FGX


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What the Best Hardware for CB Stoff CB 7 October 6th 07 02:33 PM
Mounting antennas atop rowhomes? E. Recio Antenna 4 December 2nd 06 11:55 AM
FS: Old/New Hardware Rob Mills Homebrew 0 August 27th 06 07:49 PM
Shortwave Listening (SWL) Antennas made of THHN Insulated Stranded Copper Wire from the Hardware Store RHF Shortwave 3 October 4th 05 11:42 PM
Hardware question: Daniel J. Morlan General 1 January 21st 04 03:33 PM


All times are GMT +1. The time now is 11:04 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017