I am going to explain it, but only once.
If you talk to the owner of that web site, he will tell you that the designer of the particular model of off center fed dipole that I am talking about is K3CC.
Again, if you call him on the phone, he will explain to you that K3CC holds 27 US patents and is a lot more intelligent then you will ever be.


A off center fed dipole is not a balanced antenna, but exhibits some properities not found in a regular old dipole.

Reguardless of it's length - you can always find someplace where it is resonant. Its SWR is flat as a board on most bands and is below 2:1 most everywhere else with the exception of 15 and 30 meters........

The neatest thing I ever heard was from a old Motorola Technician who told me two important things.
First was that God gave us two ears and only one mouth.
That means we should listen twice as much as we should speak.

Second was that when a manufacturer makes a radio, they make the most important knob the largest knob - hence the tuning knob is the largest knob on the radio.
If you don't like what you hear - you turn the knob.

I was under the impression that this person was a HAM and wanted to talk as well as listen.
Then we got into a discussion about scanners.
Now I am confused.

With any type of communications - if a pager is suspect and it interferes with amateur radio, you can either A - turn the operator of the pager into the FCC for interfering with amateur radio communications - good luck, or you can add filtering.

Even some two meter repeaters operates illegally, because their signals splatter all over other peoples repeaters.. We need to remember that repeaters are not built and owned by the government or industry, but by regular old ham radio operators like you and me.

As far as analog scanners goes, you sure can't beat a Uniden 890XLT...
Even unmodded, it should hold 200 channels, and has a very sensitive receive.

Moving up to a dedicated transceiver - that can be used as a all band scanner, you could purchase a Yaesu 8900 which does everything from 10 meters to 800 MHz.... At about $450 new, and with a slight modification - resistor removal, will transmit 28 - 29 Mhz, 50 - 54 MHz, 140 - 148 Mhz, 430 - 460 Mhz. and will listen everywhere else.

If you don't have a ham license, then just put the microphone away and listen.