| Home |
| Search |
| Today's Posts |
|
#3
February 3rd 07, 10:49 PM
posted to rec.radio.amateur.equipment
|
|||
|
|||
BEST channel programming software for Icom, Yaesu = ?
On Fri, 2 Feb 2007 21:23:29 -0600, "ken foshee"
wrote: I was told you could not program the memory channels for the IC-706MKII with PC software. Did I get bad info? All my radios except this one I have software to program from a PC Good afternoon, Ken. No, I'm sure you can program the channels in the IC-706. I had a program that would do that, sort of ... but it wasn't much good and I ended up getting rid of it. Can't remember which one it was, now. What are you using for your other radios? If I could find a decent one for my FT-817 that would be helpful. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Best Programming Software for Bearcat Scanners ???? | Scanner | |||
| Yaesu VX-7R Programming Cable | Swap | |||
| Icom R75 programming software etc. | Shortwave | |||
| above channel 30 ssb only..? | CB | |||
| EVE PROGRAMMING SOFTWARE??? | Swap | |||
Threaded Mode
