Home |
Search |
Today's Posts |
#14
|
|||
|
|||
Mobile Power Connector choices?
On Tue, 18 Dec 2007 10:09:13 -0500, KC4UAI wrote:
It's not been an issue for me until this Christmas when my wife decided to get me a VHF/UHF mobile rig. I've been using an older Icom 2 meter rig in both the cars for years so both cars have Icom power cables in place, but the new rig doesn't use the same power connectors. I'd like to settle on a common power connector for both the radios, but I'm not all that sure where to go to find something that is reasonably priced and is not going to disappear in the future and force me to go out and buy all new connectors again. I figured I'd not remove any of the existing connectors on the radios, but build up short jumpers that adapt to the connector of choice. I also figured that I'd use the existing power wires by replacing the current Icom power connector with what ever I pick. Any suggestions on what to use and where to get them? If you decide to go with the Anderson Power Pole connectors, Powerwerx has a good selection. I would also consider buying the West Mountain Radio crimper as I have found it makes an excellent crimp that slips easily into the plastic shell. I tried the cheaper G&B crimper and had trouble making a consistent crimp that snapped into the shell easily. APPs have an approximately 5 lbs seperation force rating, so you'll want to avoid much tension on the connector in your installation. I have them in my mobile installations without issue. 73, de Nate -- "The optimist proclaims that we live in the best of all possible worlds, the pessimist fears this is true." |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: TR-4 xcvr power connector | Boatanchors | |||
TCS power connector | Boatanchors | |||
WTB: Power connector for BC 260 | Swap | |||
FA: New BC-348 Power Connector | Boatanchors | |||
FRG-100 What power connector ? | Homebrew |