On Aug 26, 1:25 pm, dxace1 wrote:
Wow -- I guess that's what one gets in
trying to ADD relevant information....I
installed the DC connector with an eye
toward eventually installing or wiring some
sort of DC capability. . .but time overtook
me. . . so I am leaving the DC plug in place,
and the new owner can decided whether
to proceed....there has been nothing done
whatsoever to the internal circuitry, and
certainly nothing of the sort implied in the
previous note...

On Aug 26, 1:25 pm, dxace1 wrote:


Wow -- I guess that's what one gets in
trying to ADD relevant information....I
installed the DC connector with an eye
toward eventually installing or wiring some
sort of DC capability. . .but time overtook
me. . . so I am leaving the DC plug in place,
and the new owner can decided whether
to proceed....there has been nothing done
whatsoever to the internal circuitry, and
certainly nothing of the sort implied in the
previous note...


"Dxace1" your auction is now somewhat more informative. A picture of
the boxes for the Kenwood YK88a1 AM and an aftermarket Vertex CW
filter does help. So the potential bidder can guess a bit and assume
the wide position has the Kenwood AM filter, the second position is
still occupied by the standard Kenwood narrow filter, the third
position is empty and the fourth position is occupied by the Vertex
CW
filter. But a simple statement saying which filters are installed in
which positions would clarify things.

And apparently the 12 volt plug was added to the back of the
receiver. It is not clear whether the internal cable with the 3 pin
connector is dangling loose within the receiver or simply missing.
Because you talk about "eventually installing or wiring some sort of
DC capability" it makes the reader wonder whether he will have to
build a connector from the plug to the receiver board.

dxace1 wrote:

http://cgi.ebay.com/ws/eBayISAPI.dll...MESE:IT&ih=017

A first rate radio, and I'm certain that the ultimate buyer will be quite happy with his/her purchase.

dxAce
Michigan
USA

= = = On Aug 26, 9:11 am, dxace1 wrote:

- http://cgi.ebay.com/ws/eBayISAPI.dll...m=270159086992

DX Ace # 1

Nice looking Kenwood R-5000 Receiver with the
hard to find Kenwood VC-20 VHF Converter.
http://cgi.ebay.com/_W0QQitemZ270159086992

But currently there is another Kenwood R-5000 Receiver
also with the hard to find Kenwood VC-20 VHF Converter
on eBay at this time too . . .

Plus there are two more Kenwood R-5000 Receivers
listed on eBay at this time also.

FWIW - I Posted your eBay Auction and the rest to
the Kenwood R-5000 Receiver Group on YAHOO !
http://groups.yahoo.com/group/kenwood-r5000/

-FYI- Some Hard-to-Find Kenwood R-5000 Receiver Items on eBay
http://groups.yahoo.com/group/kenwoo...0/message/2246


~ RHF