Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]()
On Mar 26, 11:43*am, BobS wrote:
Thanks to everyone for their responses. If I wanted to start with installing a balun between antenna and feedline is this a situation where price does matter? Universal Radio has The RF Systems Magnetic Longwire Balun (MLB)for $80USD and this one listed on on Ebayhttp://tinyurl.com/yf3v2lzis $20 (9:1 Longwire, Balun, Unun,Adapter, Shortwave) Not trying to be cheap, but just to "see if it works" $80 is expensive and $20 is reasonable. Also, must the balun be installed outside to work? The more I have outside the better chance it will be detected by the "Condo Police". Bob Bucks County, PA Remove "MYHAT" for email response In can be inside, but better outside, and/or as far from the noise source as possible. Ground it if you can, but if you can't, not the end of the world. Paint it the color of the building; it will look like the electric company put it there. I'd try the cheap one first. You can make your own with good quality parts worth about $10, so the extra cost is probably not a big factor in performance. Good luck - noise is a tough thing to quash sometimes. Bruce |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Web Contolled Receivers (or Internet accessed receivers) | Shortwave | |||
frequency counter usage | Homebrew | |||
HF - So much space, so little usage | Shortwave | |||
2m usage | Equipment | |||
2m usage | Equipment |