Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Soldering and Antennas
"Uncle Peter" wrote in
: "Owen Duffy" wrote in message ... Here is a picture of what most of us understand to be wire nuts: http://cableorganizer.com/wire-connectors/ Quite a different thing to split bolt line taps. http://www.vk1od.net/post/post04.jpg shows a split bolt on the earth electrode. Split bolt electrical connectors look like this Stateside: http://ebusiness.ilsco.com/webapp/wc...goryDisplay?st oreId=10001&langId=-1&catalogId=1&categoryId=1 Used a lot for electrical connections to utility power transformers, etc. Yes Pete, same as I showed, but better detail in your pic. Insulating covers are also available which sort of hides the internals. Owen |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Soldering Suprise | Homebrew | |||
Soldering Suprise | General | |||
Soldering Suprise | Policy | |||
soldering with a lighter | Homebrew | |||
soldering with a lighter | Homebrew |