On 2/8/2012 5:41 PM, Jeff Liebermann wrote:
On Wed, 08 Feb 2012 13:00:12 -0600, wrote:

I'm on a boat, about 170ft from the utility post.

Ok, 200ft of coax. Presumably RG6a/u.

Recently our cable company switched to the wonderful world of
Digital TV.

You have been assimilated. Resistance is futile.

I got the new digital converter and had no picture.

Something is wrong. The nominal signal from the cable drop is suppose
to be 0dBm. If there's a splitter involved, they like to crank it up
to about 10dBm. Your 200ft of RG6a/u will drop the signal from
between 4dB at the low end, to about 6dB at the high end. Your set
top box is suppose to operate with a 10dB margin. If you would kindly
disclose the maker and model, it might be possible to find the specs.
Typically, you'll have at least 10dB margin. Even with 200ft of coax,
you should have 4 to 6dB margin.



The Box is a CISCO RNG100
Only data I know how to get is;
Tuner 537.00 Mhz 2dbmv
TDC 75.25 Mhz 5dbmv
RDC 20.00 Mhz 30.0dbmv Yes 30.0

On the road, will check in this evening.
Mikek