| Home |
| Search |
| Today's Posts |
|
#13
|
|||
|
|||
|
I just drilled a bunch in one of mine...Typical ball mount, with
four holes total. "One big"...And being the cab is double wall, I also had to drill holes inside the cab wall also.. That one is almost at roof top level, at the base... I have a camper on thattruck, "actually both of mine do", and installing an antenna is a PIA. I'm not overly keen on bumper mounts, except that they do often allow a long lower mast..The hang is much of that lower mast is up against my tailgate, and camper back. Not really good... I decided I only live once, and go for broke. It's up on the cab, on the drivers side pillar behind my head. The higher bands work a good bit better there, than the bumper... It's a tree whacker though...Thats why I always mount on the drivers side...You have a better chance of getting the "gap" between branches, when driving down a street. So far, with the little amount I've used it, it seems to be browning the food. I was on 75m one night, and got a 20 over 9 from one guy about 200 miles away, with my usual 100w. Yes, s meter reading doesn't really mean much, but it does indicate it's workin...It wasn't that late in the evening either, which was a good sign. Usually, for a mobile on 75m, the later it gets, the better in general. Long haul for sure...In the early PM, when it's mainly up/down NVIS, a mobile can be the pits compared to the dipoles...But they usually wake up later when the lower angles started working better.. MK |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
| Outdoor Antenna and lack of intermod | Scanner | |||
| Outdoor Scanner antenna and eventually a reference to SW reception | Shortwave | |||
| FS: Icom IC-38A 220mhz mobile radio and antenna | Swap | |||