"Volker Tonn" wrote in message
...
Lucky wrote:


BTW, is the Preselector for the 150 a very needed addition or are you
good to go as long you take overload precautions??? I read the 150
overloads easily.

The Lowe preselectors are very rare in Europe. These are one of the best
preselectors ever made -except some military grade stuff- and worth every
cent.


Do any other preselectors work well with this radio? But, yes, that PS looks
nice too.

Lucky

Lucky schrieb:


Do any other preselectors work well with this radio? But, yes, that PS looks
nice too.


The "Braun" preselector. It's better and even more rare and pricey.
The Yaesu FRT-7700 works fine with my Sony 2001D/2010.
This discontimued item sells used for the price as it was new....

I just don`t know a really good preselector wich is still manufactured.

"Volker Tonn" wrote in message
...
Lucky schrieb:


Do any other preselectors work well with this radio? But, yes, that PS
looks nice too.


The "Braun" preselector. It's better and even more rare and pricey.
The Yaesu FRT-7700 works fine with my Sony 2001D/2010.
This discontimued item sells used for the price as it was new....

I just don`t know a really good preselector wich is still manufactured.


I have the FRA-7700

Lucky

Lucky schrieb:

I have the FRA-7700


I have it too :-)
I have nodified it to feed an external antenna with BNC connector. So it
makes a fine selective HF preamp. I've this thing cascaded with the
FRT-7700.
It works fine with my Sony but it doesn't make anything better on my
NRD-525.

"Volker Tonn" wrote in message
...
Lucky schrieb:

I have the FRA-7700


I have it too :-)
I have nodified it to feed an external antenna with BNC connector. So it
makes a fine selective HF preamp. I've this thing cascaded with the
FRT-7700.
It works fine with my Sony but it doesn't make anything better on my
NRD-525.


You can run it active with a 9 volt battery too.
But, the 150 has a built in preamp. But that's only for the whip right?
Still, you can clip a longwire to the antenna.

Lucky

Lucky schrieb:


You can run it active with a 9 volt battery too.
But, the 150 has a built in preamp. But that's only for the whip right?
Still, you can clip a longwire to the antenna.

This idea ist not that good for me. I like to feed the preamp with a
sinal from the attic 6th floor (my appartment is on base floor) and not
with computer noise :-) There are some unused chimneys I run some
coax-feedlines through. Unfortunately I'm forbidden to go on top of the
roof :-((

Volker Tonn wrote:

Lucky schrieb:


You can run it active with a 9 volt battery too.
But, the 150 has a built in preamp. But that's only for the whip right?
Still, you can clip a longwire to the antenna.

This idea ist not that good for me. I like to feed the preamp with a
sinal from the attic 6th floor (my appartment is on base floor) and not
with computer noise :-) There are some unused chimneys I run some
coax-feedlines through. Unfortunately I'm forbidden to go on top of the
roof :-((

Do you find that you need a pre-selector where you are at due to high signal
levels from various sources or is there another reason why you need one.

I've never found a reason here to use an 'outboard' pre-selector.

dxAce
Michigan
USA

Lucky wrote:

"Volker Tonn" wrote in message
...
Lucky schrieb:

I have the FRA-7700


I have it too :-)
I have nodified it to feed an external antenna with BNC connector. So it
makes a fine selective HF preamp. I've this thing cascaded with the
FRT-7700.
It works fine with my Sony but it doesn't make anything better on my
NRD-525.


You can run it active with a 9 volt battery too.
But, the 150 has a built in preamp. But that's only for the whip right?
Still, you can clip a longwire to the antenna.

Lucky

I'm pretty sure it's set up like the 7030. The whip connects to the regular
antenna jack. You can use the preamp with any antenna, but if it's a large one,
you should expect overloading.

"Mark S. Holden" wrote in message
...
Lucky wrote:

"Volker Tonn" wrote in message
...
Lucky schrieb:

I have the FRA-7700


I have it too :-)
I have nodified it to feed an external antenna with BNC connector. So
it
makes a fine selective HF preamp. I've this thing cascaded with the
FRT-7700.
It works fine with my Sony but it doesn't make anything better on my
NRD-525.


You can run it active with a 9 volt battery too.
But, the 150 has a built in preamp. But that's only for the whip right?
Still, you can clip a longwire to the antenna.

Lucky

I'm pretty sure it's set up like the 7030. The whip connects to the
regular
antenna jack. You can use the preamp with any antenna, but if it's a
large one,
you should expect overloading.

Ok that's better. I'm spoiled by the preamps on the R-75.

Lucky